Biotechnology
 
    triple walled CO2 Incubator

Water Jacketed CO2 Incubator

  • Large 6.5 cu. ft. corrosion resistant stainless steel chamber
  • Temperature range: 5°C above ambient to 55°C (131°F)
  • Temperature control: ±0.1°C

View Quote

Fast response from our specialists

Why buy from Geneq? - find out more


Enhanced temperature stability

Thermo Scientific water jacketed CO2 incubators deliver dependable thermal protection from swings in ambient temperature and power variations. This traditional CO2 incubator is the benchmark for reliability and uniformity.

  • Unique triple-wall construction protects against ambient temperature fluctuations
  • Large 6.5 cu. ft. corrosion-resistant stainless steel chamber
  • Patented, heated dual-pane, inner-glass door minimizes condensation with improved responsiveness and faster temperature recovery
  • Internal shelves are easily installed and removed without tools for easy cleaning
  • Remote alarm contacts for connection to the in-house alarm system
  • Stacking kit included for dual-stack configuration
  • Choice of TC or IR sensor-based CO2 control

Optional class 100 HEPA filtered air protection

  • Class 100 HEPA airflow is the preferred method of protection for water jacket incubators.
  • In-chamber HEPA air filtration system continuously filters the entire chamber volume every minute, creating cleanroom Class 100 conditions to preserve your aseptic culturing environment.
  • Add the optional in-chamber HEPA filter to effectively address airborne contaminants from routine door openings, which are the primary source of contamination in most cell culture settings.

Easy to clean

  • Polished stainless steel interior with 100% coved corners is easy to clean, saves time, and reduces contamination risk.
  • Sturdy stainless steel shelves and supports can be readily removed without tools for easy cleaning, autoclaving, or adjustment.
  • The patented inner-door gasket is removable and cleanable, and adjusts continually to ensure a tight seal.
  • Optional in-chamber HEPA filter snap fits, making it easy to remove without tools.
Temperature
Control±0.1°C
Range5°C above ambient to 55°C (131°F)*
Uniformity±0.2°C @ 37°C (98.6°F)
Tracking AlarmUser-programmable high/low
Temperature Safety
SensorPrecision thermistor
ControllerIndependent analog electronic
Setability0.1%
CO2
CO2 ControlBetter than ±0.1%
CO2 Range0-20%
Inlet Pressure Required15 PSIG (1.0 bar)
CO2 SensorTC or IR
Readability & Setability0.1%
Tracking AlarmUser-programmable low
Humidity
RHAmbient to 95% @ 37°C (98.6°F)
Humidity Source3.2 qt. (3.0 liters) standard, pan
Fittings
Fill Port3/8" hose (barbed)
Drain Port1/4" hose (barbed)
Access Port1.3" (3.3 cm) with removable silicone plug with filter
CO2 Inlet1/4" hose (barbed)
Unit Heat Load
120V344 BTU/Hr
Shelves
Dimensions (W x H) inch/cm18.5 x 18.5 (47 x 47)
ConstructionStainless steel, perforated
Surface Area2.4 sq. ft. (0.2 sq. m)
Max. per Chamber40.8 sq. ft. (3.8 sq. m)
Standard, Maximum4, 17
Water Jacket Volume11.7 gal. (43.5 L)
Construction
Interior Volume6.5 cu. ft. (184.1 L)
InteriorType 304, mirror finish, stainless steel
Exterior18 gauge, cold-rolled steel, powder coated
Electrical
Rated Voltage120V, 60Hz (Operating range 90-125V)
Circuit Breaker/Power Switch6 Amps/2 Pole
PlugNEMA 5-15
Alarm ContactsPower interruption; deviation of temp, CO2
Dimensions
Exterior (W x H x D) inch/cm26 x 39.5 x 25 (66.8 x 100.3 x 63.5)
Interior (W x H x D) inch/cm21.3 x 26.8 x 20 (54.1 x 68.1 x 50.8)
Weight
Net265 lbs. (120.2 kg)
Net Operational365 lbs. (166 kg)
Shipping324 lbs. (147 kg)

 

Ordering Information
CAT. NO.DESCRIPTION
3010Termo Scientific Water Jacket CO2 Incubator 3010, 6.5 cu. ft. capacity stainless steel chamber, w/TC CO2 sensor, 120V, 60Hz
3020Thermo Scientific Water Jacket CO2 Incubator 3020, 6.5 cu. ft. capacity stainless steel chamber, w/IR CO2 sensor, 120V, 60Hz
190647Roller base
1902000HEPA filter airflow system, factory installed
190884Stainless steel shelf kit (includes shelf channels and shelf)
237016Stainless steel humidity pan (small)
1900067Replacement HEPA & inline filter kit
965010Two stage CO2 regulator
3050External gas guard, 120V