- IUL - Bio Dilutor
Two models make volumetric dilutions of 1 to 10 ml on microbiological samples. Bio Dilutor can also perform gravimetric dilutions using an external scale. Both models reduce labor, save time and insure sterility and accuracy.
Sterilization - All parts of the Bio Dilutor the liquid circuit are autoclavable. A few seconds to dismantle and assemble this circuit. During these operations, the syringe remains protected in its support.
Zero contamination - The instrument complies with all the requirements for dilutions without cross contamination between samples. The samples are kept in the tip or the little straw and then rinsed and completely expelled with the diluent.
Precision - Bio Dilutor has a stepper motor that allows very precise dilutions.
|Volume of the syringe||10, 5, 2.5 or 1 ml.Introduire into the autoclave with the separate piston.|
|Maximum flow rate of payment||4 ml / s with 10 ml syringe|
|Passage minimum volume||1/1000 of the nominal volume of the syringe|
|Single-use tips||Used in each program|
|Air bubble volume||Programmable up to 1300 .mu.l|
|Sample volume||Programmable multiple of 1/1000 of the total volume of the syringe|
|Minimum sample volume||1% of the volume used for the warning message seringue.Un warns if it is less than 5%.|
|Dilution factor||Programmable from 1: 1 to 1: 1000|
|Reproducibility||Better than 1% even with dilutions employing more than a full syringe|
|Printer connection||RS232 Series|
|Supply||100/240 V, 50 / 60Hz|
|Dimensions (Width x Depth x Height)||30 x 30 x 20cm|
|Only for the Advanced model|
|Log in balance||RS232 programmable.|
|Gravimetric dilution||By the specific weight of solvent|
|Related programs||Up to 9|
|IUL, SA reserves the right to change specifications without notice|