• Single Syringe Infusion Pump

Single Syringe Infusion Pump

Infusion / Withdrawal

  • No. of syringes: 1
  • Syringe size: 0.5 µl to 60 ml
  • Programmable

Single syringe infuse/withdraw with program option for 2 programs.

50 steps each. Accommodates syringes 0.5 µl to 60 ml. User definable flow rates with selectable target volume or time values to control the total infusion volume. 

Features

  • Holds one syringe from 0.5 µl to 60 ml
  • High resolution color touch screen
  • Unparalleled ease of use
  • Touch pad "lock" feature
  • LED light on front panel
  • Full metal chassis
  • Built in syringe table
  • Up to 30 lb/13 kg linear force
  • Advanced microstepping techniques
  • Built in RS485 interface
  • USB port
  • I/O & TTL interface
  • Continuous mode of operation
  • Spill dam
  • Programmable
Accuracy ±0.5%
Reproducibility  ±0.05%
Syringes (Min/Max) 0.5 µl to 60 ml
Flow Rate Minimum (0.5 µl syringe): 1.28 pl/min Maximum (10 ml syringe): 25.99 ml/min Maximum (60 ml syringe): 88.28 ml/min
Display 4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory Stores all Settings
Connectors RS485 - IEEE-1394 6 pos USB - Type B I/O & TTL - 15 pin D-Sub Connector
Linear Force (Max) 13.6 kg (30 lb) @ 100% Force Selection
Drive Motor 0.9 Stepper Motor
Motor Drive Control Microprocessor with 1/16 microstepping
Number of Microsteps 
per one rev.of Lead Screw
15,360
Step Revolution 0.069 µm/step
Step Rate - Minimum 27.5 sec/µstep
Step Rate - Maximum 26 usec/µstep
Pusher Travel Rate - Minimum 0.15 µm/min
Pusher Travel Rate - Maximum 159 mm/min
Power 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)
Weight 2.66 kg (5.9 lb)
Operating Temperature 4 degree C to 40 degree C (40 degree F to 104 degree F)
Storage Temperature -10 degree C to 70 degree C (14 degree F to 158 degree F)
Humidity 20% to 80% RH non condensing
Mode of Operation Continuous
Classification Class 1
Pollution Degree 1
Installation Category 11
Regulatory Certification CE, UL, CSA, CB Scheme, EU RoHS