Biotechnology
 
    light, compact mobile pipette

mobile pipette


View Quote

Fast response from our specialists

Why buy from Geneq? - find out more

Specifically designed to minimize operator fatigue, the new Portable Pipet-Aid XP is smaller and lightweight. It accepts most pipets from 1 to 100 mL. Depressing the top button fills the pipet, depressing the lower button empties it. The flow rate is proportional to the amount each button is depressed.

Features
  • The lighter, more compact Portable Pipet-Aid®
  • Nine independently controlled fill and empty speed range options
  • Easy access battery replacement
  • Locking nosepiece
  • Removable stand
  • Optional Colored Nosepieces

 1w1111wwwwwwwww

 contro
Each button has three speeds, F Fast, M Medium, S Slow. The medium speed is suitable for most routine techniques. Fast can be used for rapid filling of large pipets or breaking up cell clumps. Slow speed is ideal when using small pipets or when more precise delivery is required. A gravity drain model is available which substitutes a gravity drain (G) function for the fast (F) mode on the dispense button.

 

Battery
The XP is powered by a nickel metal hydride (Ni-MH) 9 volt rechargeable battery. To obtain maximum life from the battery, recharge overnight as a routine. The battery can be replaced by removing the screw marked B on the schematic (found in Pipet-Aid XP support) below and sliding out the cover (078).

 

Double membrane filter
The XP incorporates a Tissue Culture Nosepiece which features a unique filter element. The TC filter will cease to allow air to pass in either direction if it becomes wet, alerting the user to possible contamination of the rubber insert. To remove the filter, slide back the nosepiece lock (074) and twist the nosepiece to release the filter.

 

Specifications
Size5.5 in.
Weight7.5 oz
CapacityAccepts 1 to 100 ml pipets
Battery9 V Ni-MH

 

Cat. No.Description
4-000-101Portable Pipet-Aid XP supplied complete with 110V recharger plus four replacement filters
4-000-201Same as above but 220V, CE
4-000-102Portable Pipet-Aid XP with gravity drain, 110V
4-000-202Portable Pipet-Aid XP with gravity drain, 220V, CE

 

Replacement parts
CAT. NO.DESCRIPTION
PACK
4-000-002Rubber Insert
2
4-000-030Pipet-Aid charger, 110V
1
4-000-031Pipet-Aid charger 220V (Euro)
1
4-000-033Pipet-Aid charger, 200V (UK)
1
4-000-0359V rechargeable battery
1
4-000-0409V portable motor and pump
1
4-000-051Replacement filters
5
4-000-052Replacement filters
50
4-000-057TC rubber gaskets
2
4-000-072XP switch operator
1
4-000-073XP valve body assembly including buttons and spring
1
4-000-074XP nosepiece release
1
4-000-075XP handle connector
1
4-000-076XP wire harness, switch and terminals
1
4-000-077XP handle shell includes 2 handle halves and 1 battery door
1
4-000-078XP battery door
1