The Boekel Slide Moat is a versatile microscope slide incubator that is equally at home in a clinical or basic research laboratory.
The Slide Moat has been specifically designed for the rigors of in situ hybridization or denaturation and is superb for all slide drying and warming procedures used in histology, cytology or pathology labs.
The Slide Moat has an operating temperature range of 30°C to 100°C and uses a PID controller for easy temperature selection, rapid heat up and superb stability. This unit has a tight fitting tempered glass lid which seals to an integral gasket on the heating base. This airtight lid seals in moisture and only a few drops of water are required to maintain a saturated atmosphere for overnight incubations. The Slide Moat accommodates up to 30 standard microscope slides 1 x 3 inch or specialty slides designed for in situ procedures.
- 30 standard microscope slide capacity
- PID temperature controller for easy temperature selection
- Tempered glass lid which seals with integral gasket on heating base
- Excellent temperature uniformity and stability
NOTE: Boekel strongly recommends using covered and sealed slides for higher temperatures (> 37° C) or prolonged period incubations (> 1 hour).
C1303205 - Light shield cover
|Model 240000 (115 VAC)||Model 240000-2 (230 VAC)|
|Temperature Range||Ambient + 5°C to 100°C|
|Heat-up Time||Ambient to 65°C in 20 minutes|
|Temperature Setting/ Display||PID/ LED|
|Stability*||Typically +/- 0.2°C or better throughout operating temperatures|
|Uniformity**||+/- 35°C at 37°C; +/- 0.7°C at 65°C|
|Capacity||30 - 1 in x 3 in slides, 3 rows of 10|
(Width x Length x Height)
|40.6 cm x 34.9 cm x 14.6 cm|
(16 in x 13.75 in x 5.75 in)
|Clearance between lid and slide pedestal||1.0 cm (.48 in)|
|Net Weight||8.2 kg (18 lb)|
|Shipping Weight||10.4 kg (23 lb)|
|Electrical||115 VAC 50/60 Hz 200 W (UL/ CSA)***||230 VAC 50/60 Hz 155 W (CE)|
|* Stability is the variation in temperature at a single point over a long period of time.|
** Uniformity is the variation in temperature at any 2 locations on the heating plate at any instant in time.
*** Certified to UL 61010A-1 and CSA C22.2 No. 1010