Biotechnology
 
    Températures de surface des solides, liquides, gaz, semi-solides

Sondes à usage général


Voir la soumission  

Réponse rapide par nos spécialistes

Avantages de faire affaire avec Geneq - en savoir plus

HT-1

Modèle : HT-1

  • "Workhorse" probe for liquids, gases, semi-solids. Plastic handle with straight stainless steel shaft. Not good for surface temps. Max. Temp. 400°C. Time constant 0.5 secs. 5 ft. lead. Not Isolated.
HT-2

Modèle : HT-2

  • As HT-1 but with 9" shaft
BT-1

Modèle : BT-1

  • For surface temperatures of solids, also for liquids, gases and semi-solids. Probably our best general purpose probe. Welded stainless steel shaft, plastic handle. Tip is .02" diameter bent at right angle to probe to facilitate accurate surface measurement. 5 ft. lead. Immersible. Max. Tip Temp. 240°C. Time constant 0.15 secs. Not Isolated.
DPT-12

Modèle : DPT-12

12"

DPT-24

Modèle : DPT-24

24"

DPT-35

Modèle : DPT-35

36"

TFT-12

Modèle : TFT-12

  • 12"
TFT-24

Modèle : TFT-24

  • 24"
TFT-36

Modèle : TFT-36

  • 36"
PT-6

Modèle : PT-6

  • Sensor Six-Pack. For multi-point measurements. Inexpensive, flexible, welded sensor beads, tough Kapton insulation, 5 ft. leads. Max. Temp. 400° C. Time constant 0.01 secs. Per package of six. Not Isolated.
PIT-12

Modèle : PIT-12

  • For permanent installation. 12" lnconel shaft 1/8" dia. Can be formed to fit inside or outside any dia. pipe. Complete with 1/8" NPT compression fitting. 10 ft. leads and quick-disconnect plugs and sockets. Max. Temp. 400°C (750° F). Time constant 3 secs. Not Isolated.
PIT-6

Modèle : PIT-6

  • Has 6" stainless steel shaft; otherwise as PIT-12.
GT-1

Modèle : GT-1

  • Air and gas probe. 24" #304 stainless steel shaft, wooden handle. 5 ft. leads. For instant readings of temperature gradients in environmental chambers, freezer boxes, etc. Max. Temp. 200°C. Min. Temp. -200°C. Isolated.


HT-1

"Workhorse" probe for liquids, gases, and semi-solids. Plastic handle with straight stainless steel shaft. Not good for surface temps. Max. Temp. 400°C. Time constant 0.5 secs. 5 ft. lead. Not Isolated.

HT-2

As HT-1 but with 9" shaft.

BT-1

For surface temperatures of solids, also for liquids, gases, and semi-solids. Probably our best general purpose probe. Welded stainless steel shaft, plastic handle. The tip is .02" diameter bent at a right angle to probe to facilitate accurate surface measurement. 5 ft. lead. Immersible. Max. Tip Temp. 240°C. Time constant 0.15 secs. Not Isolated.

DPT Series

Immersion probes for liquids. #304 stainless steel welded shaft, wooden handle. 5 ft. lead. Max. Temp. 400°C (750°F). The time constant is 2 secs. Not Isolated.

TFT Series

Immersion probes for corrosive liquids. Similar to the DPT series but the shaft is Teflon coated. Max. Temp. 150°C (300°F). The time constant 3 secs. Isolated. 5 ft. lead.

PT-6

Sensor Six-Pack. For multi-point measurements. Inexpensive, flexible, welded sensor beads, tough Kapton insulation, 5 ft. leads. Max. Temp. 400° C. Time constant 0.01 secs. Per package of six. Not Isolated.

PIT-12

For permanent installation. 12" Inconel shaft 1/8" dia. Can be formed to fit inside or outside any dia. pipe. Complete with 1/8" NPT compression fitting. 10 ft. leads and quick-disconnect plugs and sockets. Max. Temp. 400°C (750° F). The time constant 3 secs. Not Isolated.

PIT-6

Has 6" stainless steel shaft; otherwise as PIT-12.

GT-1

Air and gas probe. 24" #304 stainless steel shaft, wooden handle. 5 ft. leads. For instant readings of temperature gradients in environmental chambers, freezer boxes, etc. Max. Temp. 200°C. Min. Temp. -200°C. Isolated.


TypeShaft
DPT-1212"
DPT-2424"
DPT-3536"
TypeShaft
TFT-1212"
TFT-2424"
TFT-3636"