Environment
    Optical Dissolved Oxygen ProbeOptical Dissolved Oxygen Probe

Optical Dissolved Oxygen Probe

4-20 mA and RS 485 output

  • OD8325
  • Optical device complete of fluorescent material
  • Dissolved oxygen and temperature measuring circuit
  • 2-wire 4/20 mA analog output

View Quote

Fast response from our specialists

Why buy from Geneq? - find out more


This unique submersible probe has been designed to measure dissolved oxygen based on fluorescent technology.

The measuring system consists of:

  • Optical device complete of fluorescent material
  • Dissolved oxygen and temperature measuring circuit
  • 2-wire 4/20 mA analog output
  • RS 485 digital output
  • Nozzle for the autoclean by external pressure air

The measuring is provided in ppm or % of air with automatic temperature compensation.Through commands from the Personal Computer hyperterminal, the serial interface allows the dissolved oxygen and temperature data transmission, the ppm or % of air scale selection, the configuration of pressure, salinity and RH compensation, the zero and sensitivity calibration. Thanks to its 4/20 mA isolated output, the probe can be directly connected to a PLC or data logger.The probe can be connected to BC7635 or BC7335, which provides the power, the measuring readout, 2 set-points, alarm relay and the holding function for an external cleaning cycle. The most common applications of this probe include: water quality monitoring, municipal and industrial water treatment and aquaculture.

Principle of operation

A light beam of a specific wavelength is sent to a special fluorescent layer in contact with the sample.The absorbed light energy is partially released as a light pulse with a higher wavelength. This phenomena is called fluorescence. If oxygen molecules are in contact with the sensing layer, the fluorescing is reduced (quenching).By measuring the amount of quenching it is possible to determine the oxygen concentration. The advantages of this measuring method are the absence of electrolyte and membrane, the possibility to measure the oxygen concentration in water or in air, and a good sensitivity in a low oxygen concentration.

Scale0/20 ppm - 0/200% air
Sensitivity+/- 0,5 % of the scale
Response time95% in < 60 seconds
Power supply9/36 Vdc
Analog output4/20 mA isolated current Loop
Load600 Ω max. at 24 Vdc
Digital outputRS 485
Temperature compensationautomatic
Secondary parameterspressure, salinity, RH
Room temperature-5/50 °C
Max. pressure1 Bar at 25 °C
Autocleanby pressure air 3 bar max
DimensionsL=165 mm total, D= 60 mm
BodyPVC
Cable10 m (100 m max.)
ProtectionIP68
The technical specifications may be changed without notice