• Automatic Pull-Off Adhesion Gauge

Automatic Pull-Off Adhesion Gauge

ASTM C1583, ASTM D4541, ASTM D7234-12, AS/NZS 1580.408.5…

  • Automatic hydraulic pump 
  • Fully adjustable pull rates 0.1-1.4MPa/s (14.5-203psi)
  • Can be used with 10,14.2, 20 and 50mm diameter dollies

The Elcometer 510 Automatic Pull-Off Adhesion Gauge accurately measures the adhesion strength of coatings on a wide range of substrates.


  • Automatic hydraulic pump ensures smooth and continuous pressure application for consistent, repeatable adhesion strength results
  • Fully adjustable pull rates 0.1-1.4MPa/s (14.5-203psi) to meet National and International Standards
  • Can be used with 10,14.2, 20 and 50mm diameter dollies
  • User definable limits with unique pressure hold and release function
  • User definable measurement range with an accuracy of ±1% of full scale:

- 10mm dolly: 100MPa (14400psi)

- 14.2mm dolly: 50MPa (7200psi)

- 20mm dolly: 25 MPa (3600psi)

- 50mm dolly: 4MPa (580psi)

  • Dust and water resistant rugged design to IP64
  • Interchangeable units: MPa, psi, Nmm2 and N
  • A range of standard and thin substrate actuator skirts (compatible with Elcometer 506) available for adhesive strength testing on thick, thin, flat or convex substrates Store up to 60,000 readings with individual pull graphs in up to 2,500 alpha numerical batches, complete with attribute failure information
  • USB and Bluetooth® data output - compatible with ElcoMaster® App for iPhone, iPod, iPad and Android mobile devices.


Standards:

ASTM C1583, ASTM D4541, ASTM D7234-12, AS/NZS 1580.408.5, BS 1881-207, DIN 1048-2, EN 1015-12, EN 12636, EN 13144, EN 1542, EN 24624,  ISO 16276-1, ISO 4624, JIS K 5600-5-7, NF T30-606, NF T30-062



Key Features Explained
Automatic adhesion tester with selectable pull rates for 10, 14.2,
20 & 50mm diameter dollies.
View trend graphs or live statistics alongside the reading value. Individual user definable pull rate graphs can be saved with each reading.
Stores individual readings and pull rate graphs in up to 2,500 alpha numeric batches, together with date, time and attribute information. Either pull to maximum or pull to preset limit. Unique time hold feature allows users to set a delay before pressure returns to zero. Save cohesive and adhesive failure attributes alongside your adhesion pull data in accordance with National and International Standards.

 

Automatic Pull-Off Adhesion Gauge
Powered by either standard rechargeable batteries or AC mains*. Each battery charge performs up to 200 pulls. Battery recharge time <300 minutes. Transfer data to your PC via USB or Bluetooth® for further analysis with ElcoMaster™ software or view live pull rate graphs in ElcoMaster™ during the test. Using wireless Bluetooth® communication link the gauge to an Android™ or iPhoneǂ mobile device. Live GPS coordinates from your mobile device can be added to reports and emailed instantly.
A range of interchangeable thin & standard substrate skirt adaptors allow each gauge to be used with 10, 14.2, 20 or 50mm diameter reusable dollies, ideal for testing coatings on thin, thick, flat or convex substrates. The optional magnetic anchor clamp ensures the actuator doesn't fall during tests on vertical surfaces or testing at height. Supplied in a robust plastic carry case for easy transportation to and around the job site.
* Model T only.
ǂ iPod, iPhone and iPad compatible.

 



Product Feature
  Model S Model T
Repeatable & reproducible measurements
Easy to use menu structure; in multiple languages
Tough, impact, waterproof & dust resistant; equivalent to IP64
Bright LCD colour screen; with ambient light sensor
Scratch & solvent resistant display; 2.4” (6cm) TFT
Calibration certificate
2 year gauge warranty
Automatic rotating display; 0°, 180°
Data output via USB (Live readings - and batch)
Data output via Bluetooth®  
PC command; start & stop gauge from a PC with live readings (USB only)  
Switchable Units (MPa, psi, N, N/mm-2)
On-Screen Statistics (η, x, σ, hi, lo, COV, N>hi limitǂ)
Pull Rate Indicator
Trend Graph
Pull Rate Graph (Load v Time)  
Interchangeable Dolly Selection; 10, 14.2, 20 & 50mm
User Selectable Pull Rates; (Model S & Model T Standard Mode)
10mm: 1.00, 2.00, 3.00, 4.00, 5.00 MPa/s 125, 200, 400, 600, 725psi/s
14.2mm: 0.4, 0.7, 1.4, 2.0, 2.5 MPa/s 60, 100, 200, 300, 360psi/s
20mm: 0.2, 0.3, 0.7, 1.0, 1.2 MPa/s 30, 50, 100, 150, 180psi/s
50mm: 0.04, 0.08, 0.12, 0.16, 0.20 MPa/s 5, 8, 16, 24, 30psi/s
User Selectable Pull Rates; (Model T Advanced Mode)
10mm: 0.40 - 5.60 MPa/s 58 - 812psi/s in 0.1MPa / 1psi steps
14.2mm: 0.20 - 2.80 MPa/s 29 - 403psi/s in 0.1MPa / 1psi steps
20mm: 0.10 - 1.40 MPa/s 15 - 203psi/s in 0.1MPa / 1psi steps
50mm: 0.02 - 0.22 MPa/s 2 - 32psi/s in 0.01MPa / 0.1psi steps
 
User Selectable Limit & Limit Hold Time  
Gauge Memory; maximum number of readings 60 60,000*
Number of Batches (Alpha Numeric - Model T) 1 2,500
Attribute Modes to meet National & International Standards  
Display Modes

Readings, Selected Stats & Run Chart (last 20 readings)

Pull Rate Graphs

 

Batch Review

 
Power; Battery (B), AC Mains Power (M) B B, M
USB Cable & ElcoMaster™ 2.0 CD
Power Cable with Multi International Plug Adaptor (UK, EU, US, AUS)  
Plastic Transit Case
Date & Time  
In Field Adhesion Calibration Verification Mode
ǂ Model T only.
* When ‘Rate Graph’ is enabled, the number of readings which can be stored depends on the graph resolution selected



 


Pressure Accuracy ±1% of full scale Pull Rate Accuracy ±(2.5% + 0.3 seconds)
Pressure Resolution 0.01MPa (1 psi) Pull Rate Resolution 0.01MPa/s (1psi/s)
Dolly Diameter 10mm (0.39”) 14.2mm (0.56”) 20mm (0.76”) 50mm (1.96”)
Operating Range 8 to 100 MPa 4 to 50 MPa 2 to 25 MPa 0.3 to 4 MPa
(1200 to 14400 psi) (600 to 7200 psi) (300 to 3600 psi) (50 to 580 psi)
Pull Rate Range 0.4 - 5.6MPa/s 0.2 - 2.8MPa/s 0.1 - 1.4MPa/s 0.02 - 0.22MPa/s
(58 - 812psi/s) (29 - 403psi/s) (15 - 203psi/s) (2 - 32psi/s)
Gauge Dimensions 260 x 100 x 66mm (6.3 x 3.9 x 2.6”)
Actuator Height1 85mm (3.4”) 85mm (3.4”) 85mm (3.4”) 110mm (4.3”)
Instrument Weight1 2.9kg (6.4lb) 2.9kg (6.4lb) 2.9kg (6.4lb) 3.1kg (8.3lb)
Kit Weight 6.1kg (13.5lb) 7.3kg (16.1lb)
Power Supply 8 x AA NiMH/Alkaline batteries (16 rechargeable batteries supplied complete with charger) or AC
mains power (Model T only)
Battery Life ~200 pulls per charge up to 25MPa (3600psi) at 1MPa/s (150psi/s), recharge time <5 hours
Packing List: 20mm Kit Elcometer 510 Adhesion Tester with 20mm dollies (x10), standard skirt for 20mm dollies, 20mm dolly cutter handle, 20mm dolly cutter, Araldite standard two part epoxy adhesive (2 x 15ml tubes), abrasive pad, shoulder harness, carry case, 16 x AA MiMH rechargeable batteries & charger (UK, EU, US, AUS), mains power supply (UK, EU, US, AUS) (Model T), ElcoMaster™ CD & USB cable, calibration certificate and operating instructions.
Packing List: 50mm Kit Elcometer 510 Adhesion Tester with 50mm dollies (x6), standard skirt for 50mm dollies, 50mm dolly cutter arbor, 50mm dolly cutter, Araldite standard two part epoxy adhesive (2 x 15ml tubes), abrasive pad, shoulder harness, carry case, 16 x AA MiMH rechargeable batteries & charger (UK, EU, US, AUS), mains power supply (UK, EU, US, AUS) (Model T), ElcoMaster™ CD & USB cable, calibration certificate and operating instructions.