Materials Testing
 
    Test kit on Chloride Ion
EL1342-000

Test kit on Chloride Ion

Abrasive / Concrete

  • No need for needles
  • This test does not contain mercury

View Quote

Fast response from our specialists

Why buy from Geneq? - find out more

Chlorides, deposited on a surface during sanding by contaminated abrasive can cause premature failure of the coating.

Contamination may accumulate. Particularly if the blasting medium is recycled several times. The Elcometer 134A is an accurate field test and easy to use, allowing you to determine if your abrasive is contaminated with chlorides and thus prevent costly surface defects.

Tests on the chloride ion can now be made quickly and accurately using a new extraction method, based on the solution CHLOR * EXTRACT ™.


Features:

  • No need for needles
  • This test does not contain mercury


EL1342-000Test kit on Chloride Ion abrasive / concrete Elcometer 134A

EnclosureWeatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP64.
Dimensions9.5” L x 5.25” W x 5.875” H
Weight3.8 Lbs (standard 4 gas with batteries)
Detection PrincipleCatalytic combustion, electrochemical cell, galvanic cell, infrared,
photo ionization detector, and thermal conductivity.
Sensor Life2 Years under normal conditions.
Sampling MethodPowerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH
Display3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand with adjustable time.
LanguageReadout can display in 5 languages (English, French, German, Italian, or Spanish.
Alarms2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable.
Alarm MethodBuzzer 95 dB at 30 cm, four high intensity LED’s.
Controls4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features.
Continuous OperationAt 70°F, 16 hours using alkaline batteries, or 18 hours using Ni-MH.
Power Source4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines).
Operating Temp. & Humidity-20°C to 50°C (-4°F to 122°F),0 to 95% RH, non-condensing.
Response Time30 Seconds to 90% (for most gases) using standard 5 ft hose.
Safety RatingIntrinsically Safe, Class I
Groups A, B, C, D.Approvals: CSA / CE
Standard AccessoriesShoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter
Optional AccessoriesDilution fitting (50/50)
Ni-MH batteries
Battery charger, 115 VAC, 220 VAC, or 12 VDC (charge time 4 hours) with continuous operation function
Extension hoses
WarrantyTwo year material and workmanship, one year for PID sensor