• Chambres à humidité réfrigérées

Chambres à humidité réfrigérées

DIN 12880

  • Available in 10 or 28 cu. ft.
  • Temperature range: 10-70°C 
  • Humidity range: 40- 95%RH

SHEL LAB Humidity Test Cabinets provide a controlled environment for a wide range of industrial and biotechnology testing applications.

This line is designed to duplicate a natural condition, which allows testing the limitations of a sample when exposed to various temperature and moisture fluctuations. These humidity test chambers incorporate a refrigeration system that dramatically increases the operational range of the cabinet Microprocessor controls maintain temperature and humidity in approximate ranges of 10-70°C and 40- 95%RH, respectively. An extra large water jacket minimizes condensation inside the chamber and supports optimum uniformity conditions. A low-pressure water vapor generator, injecting saturated water vapor into the recirculating air duct, controls chamber humidification. This process is preferable to steam generation because steam introduces additional heat to the chamber atmosphere, which then compromises temperature control. Uniform temperature and humidity are maintained using the same horizontal air flow technology employed in the SHEL LAB ovenfamily.

Applications include

  • Shelf Life Testing
  • MIL-SPEC Packaging
  • Component Burn In
  • Vapor Transmission
  • Stability Testing
110-120V SHC10R
Medium
SHC28R
Large
Exterior Dimensions (wxdxh) Inches 44.3 x 32.8 x 57.0 42.5 x 37.0 x 85.0
cm 112.4 x 83.2 x 144.8 108.0 x 94.0 x 215.9
Chamber Dimensions (wxdxh) Inches 30.0 x 21.0 x 30.0 30.2 x 26.0 x 62.0
cm 76.2 x 53.3 x 76.2 76.8 x 66.0 x 157.4
Incubator Chamber Capacity cu ft 10 28
L 309 799
Temp. Range Celcius 10ºC to 70ºC 10ºC to 70ºC
Temp. Uniformity Celcius +/- 0.5°C at 37°C +/- 0.5°C at 37°C
Relative Humidity Percent Ambient + 10% to 95% Ambient + 10% to 95%
Number of Shelves Included 3 6

Specifications are based on nominal values at an ambient temperature of 25°C and a line voltage of 120V or 240V respectively. The temperature data is determined in accordance with DIN 12880. We reserve the right to alter technical specifications at any time.