Adaptateur sans fil
- Stevens - Shark
- Radio Bluetooth de classe 1
- Portée de 100 mètres
- Communique avec n'importe quel périphérique compatible Bluetooth
Stevens’ Shark serial cable replacement uses Bluetooth wireless technology to transmit critical data in industrial, medical, security and environmental monitoring applications.
Its robust design handles many extreme environmental conditions. The Shark will communicate with another Shark or with any Bluetooth-enabled device.
The Shark is a Class 1 Bluetooth radio that provides a 100-meter range of communications. With an external antenna attachment and specific antenna options, you can increase the communication range between the Shark and other Bluetooth wireless-enabled devices. Unlike other RS 232 adapters, the Stevens Shark emulates the behavior of a serial cable connection by controlling the serial port and turning the serial port on only when a Bluetooth wireless connection is established.
The Shark includes an internal lithium ion rechargeable battery as an optional power source that provides approximately 4 hours of continuous operation in Bluetooth wireless connected mode. The Shark also incorporates LEDs that indicate various levels of connection and power status. Power management is an integral part of the Shark design, including the serial port control, idle mode, low operating current and a switch that turns off the power LED to conserve standby current.
In addition to built-in durability and flexibility, the Shark is designed for ease-of-use. It is pre-configured in slave mode to operate with most applications without any set-up procedures. The Shark Config Utility Software is an easy-to-use Windows application for configuration of the Shark to individual needs, including designating the Shark as a master device to control and discover other Bluetooth devices, assigning a unique device name and activating secure communications. The software can be used over a Bluetooth wireless link. No installation of drivers is required.
- Turn any instrument with serial port into a Bluetooth-enabled device
- Collect data from 100 meters away with smartphone or laptop
- Designed for outdoor or indoor use
- Boost range with multiple antenna options
- Extend device life with Shark’s built-in power management
- Robust electronics ideal for environmental or industrial applications
- Programs in minutes with Windows-based software
- Use internal or external power supply
|Frequency Band||2.4 to 2.483 GHz|
|Modulation scheme||FHSS, GMSK|
|Receive sensitivity||-80 dBm, type for BER, 0.1%|
General Access Profile
Service Discovery Profile
Serial Port Profile
|Configurable||1200 to 115,200 bps|
|Flow control, default||None|
|Operating temperature||-40° to 80° C|
|Storage temperature||-40° to 90° C|
|Humidity||5% to 95% non-condensing|
|Enclosure||Polycarbonate 48.8 x 85.7 x 20 mm|
ANTENNA AND PORTS
|External Antenna||+2 dBi|
|RF Connector||Female SMA|
|Serial Connector||9-pin male D-SUB|
|Battery Type||Lithium ion rechargeable|
|Battery Life||Approximately 4 hours of continuous use|
|Number of Recharge Cycles||500|
|External Power Supply||6 to 15 VDC|
|Transmit Power||20 dBm max|
|Master mode||55 mA typical|
|Slave mode||4 mA typical|