A compact handheld ultrasonic pulse velocity and pulse echo tester is designed for ultrasonic thickness measurements and flaw detection of concrete and reinforced concrete constructions and rocks
The flaw detector represents a compact electronic unit equipped with a large high-contrast TFT display and a keyboard.
Despite multifunctionality, the instrument is easy to use due to its intuitive interface and icons menu providing quick access to the main settings and functions of the instrument.
The ergonomic design of the flaw detector and its lightweight (as little as 800 grams),as well as the capability of fastening the electronic unit in the specialized pad, provide convenient operation of the instrument in hard-to-reach areas and allow its working at height.
All inspection results are recorded into the instrument’s memory and can be transferred via the USB port to the external PC for further processing, registration, and activation.
DELIVERY KIT
- A1220 MONOLITH – ultrasonic flaw detector
- Antenna array М2502 0.05A0R100X60PS
- Double LEMO 00 – LEMO 00 cable 1,2 m
- USB A – Micro B cable
- Net adaptor with cable 220V-15V
- Carrying map-case
- Softcover
- Case
- Visualization software INTERVIEW (3D tomographic imaging by grid-scan function, advanced visualization, and analysis functionality
Slice and projection images by grid-scan function (B-Scan, C-Scan, D-Scan, thickness-profile)
| Maximum deepness of the echo-signals visualization (at transversal wave control) | 2150 mm |
|---|---|
| Maximum length of the signal realizations, visible on the device’s screen | 1600 μs |
| Maximum measured thickness of concrete (concrete grade 400) | 600 mm |
| Minimal diameter of flaw in form of an air cylinder | 30 mm |
| The error of measurements of flaw location thickness and depths | 10 % |
| Time of one measurement processing and writing the result in memory | 10 s |
| The number of single A-scans, that can be written into memory | 200 |
| Maximal area of the controlled surface (MAP mode) | 2 m2 |
| Material velocity range | 1 000 – 9 999 m/s |
| Drive-pulse generator amplitude | 20, 100, 200 V |
| Pulse form | Meandr, 0.5÷5.0 periods |
| Pulse frequency | 1 – 50 Hz |
| Receiving bandwidth | 10 – 300 kHz |
| Gain setup range | from 0 to 100 dB, step 1 dB |
| The quantity of the programmable points of DAC function | 32 |
| DAC function setup range | 30 dB |
| Power source | Built-in battery |
| Operation time | 14 h |
| Battery charging time | 3 h |
| Operating temperature range | from –20 to +45 ºC |
| Display type | TFT (640 х 480) |
| Electronic unit size | 260 х 156 х 43 mm |
| Electronic unit weight | 800 g |
| Size of M2502 antenna array | 139 х 105 х 89 mm |
| Weight of M2502 antenna array | 1,1 g |
This document was edited with the free version of the instant HTML converter tool. Try it here and use it every time for your projects.
Can we help you?
min 10 ch