Portable automatique flash point tester – closed cup – gaz
- STANHOPE-SETA - 30020-0
Setaflash Series 3e Flash Point Tester - 30020-0
The Setaflash Series 3e closed cup flash point tester is a compact, bench top/portable instrument used to carry out ‘flash/no flash’ tests and determine flash point temperatures.
The Series 3e can perform tests at temperatures ranging from 0 to 300 °C (with the 13870-0 Seta Cooling Module allowing temperatures below ambient).
Operated by a touchscreen, icons guide you through the simple test procedure, with a test taking less than 2 minutes with just 2 or 4 ml of sample required. Up to 10,000 test results can be saved in the instruments internal memory which can be saved and transferred via USB port for data analysis.
- Electric ignition
- Ambient to 300 °C
- Small sample size
- Under 2 minute test
- Simple operation
- Compact, rugged, portable design
- Suitable for unknown samples using ramp mode
- Automated flash detection
- Automatic barometric pressure correction
- Colour touchscreen
- USB port and result storage
Ease of use
All functions on the Series 3 including test parameters, instrument status and test results are accessed via the touchscreen display and push button. An audible prompt sounds when a flash is achieved and an automatic flash detector enhances repeatability.
Calibration and verification
Calibration of the Series 3 can be performed in the field, eliminating the costs and time associated with sending the instrument to a service centre.
Service and maintenance
The rugged design ensures minimal operational maintenance in needed.
*Supplied with: 2 ml syringe, ignitor, Allen key, mains lead, quick start guide and instruction manual
|TEMPERATURE RANGE||Ambient to 300 °C|
|TEMPERATURE RAMP MODE||Automatic or custom settings (ramp rate: up to 6 °C/min and beep rate: up to 5 °C/B intervals) Extended test range, 100 °C from start temperature|
|TEMPERATURE SELECTION||°C or °F|
|USER INTERFACE||Colour LCD display - touch screen sensitive|
|NAVIGATION||Control knob (rotational and push-down)|
|DATA STORAGE||1GB (internal memory and integrated USB port)|
|SAMPLE SIZE||2 ml or 4 ml|
|PRESSURE CORRECTION||Automatic pressure correction|
|VOLTAGE||110 to 250 V a.c~50/60 Hz (universal)|
|POWER||200 W (Max.)|
|SIZE (HXWXD)||19.5 cm x 29.5 cm x 14 cm|
Can we help you?