Materials Testing
    Core Sampling SOIL, Kit, motorized, gas poweredCore Sampling SOIL, Kit, motorized, gas poweredCore Sampling SOIL, Kit, motorized, gas poweredCore Sampling SOIL, Kit, motorized, gas poweredCore Sampling SOIL, Kit, motorized, gas powered

The motorized Soil Core Sampling Kit

  • AMS - AM36001-00
  • Ideal for taking 2ft. & 4ft. length continuous core samples by hand
  • Solution for low overhead and remote access areas
  • Stronger sample rods compared to typical hand sampling soil probes
  • Can be used with or without a plastic liner
  • No Power Necessary

View Quote

Fast response from our specialists

Why buy from Geneq? - find out more


The MOTORIZED Core Sampling SOIL Kit with the Gas Powered REDI Boss Hammer is ideal for obtaining core samples up to a depth of 8’ (2.4m).

The MOTORIZED Core Sampling SOIL Kit's Lower & Upper Extensions have male/female (modified acme) heat treated threads. The 4’ Gas Powered Slotted Sampler Tube allows the sampler to be used with or without a Plastic Liner. If a sample is collected without a Plastic Liner, the Cleanout Spoon may be used to eject the core sample from the slot.

Also included in the kit are two (2) Lower & two (2) Upper Gas Powered Extensions. Extensions give you the option of creating a 2’ or 4’ sampler. Upon assembly, you will notice two parallel knurl marks on each of the four (4) Extensions. When creating a 2’ sampler, the knurl marks should be at the top of the Extension. When creating a 4’ sampler, the knurl marks on both Extensions should meet at the connection point in the middle of the sampler. Please refer to the expanded photo on the Technical Data Sheet. Properly connecting your Extensions with these knurl marks will ensure the proper timing of your Plastic Liner so there is minimal ‘liner float’ inside the sampler.

Whether you are running a 2’ sampler or a 4’ sampler, there will be times when you need to lower the sampler in an existing borehole in order to collect a core from a deeper interval. This is when you will use the Gas Powered Liner Retainer Coupler. The Liner Retainer Coupler holds your Plastic Liner in place inside the ‘lead’ sampler and allows you to add an additional sampler Extension(s). After driving your sampler to depth, the Foot Jack is an ergonomic and easy way to remove your sampler. Simply slide the 2” Foot Jack Shackles over the drive head of the sampler and step on the foot pad of the Foot Jack. The Foot Jack Shackles will automatically fall lower on the sampler and grab each time you press down on the foot pad. Please note that if the soil is soft at the surface, it is beneficial to have additional stability underneath the footplate of the Foot Jack to keep it from sinking.

Kit Includes

  • (1) Gas Powered REDI Boss Hammer w/ 3-1/8" Barrel
  • (1) 4' Gas Powered Slotted Sampler Tube
  • (2) Gas Powered Lower Extension
  • (2) Gas Powered Upper Extension
  • (1) Gas Powered External Drive Tip
  • (1) Gas Powered Liner Retainer Coupler
  • (1) Gas Powered Drive Head Adapter
  • (2) 14" Pipe Wrench
  • (1) Cleanout Spoon
  • (1) Foot Jack Only
  • (1) 2" Foot Jack Shackles (1 Set)
  • (1) Steel Tee Handle, 3/8" Thread
  • (1) 4' Rod For Accessories, 3/8" Thread
  • (1) 3/8" X 3' Internal Rod w/ Coupler, 3/8" Thread
  • (1) Brush For 2-1/8" or 2-3/8" Direct Push Extensions, 3/8" Thread
  • (1) 1-1/2" X 4' Plastic Liner
  • (1) 1-1/2" X 2' Plastic Liner
  • (1) 1-1/2" Plastic Core Catcher
  • (4) 1-1/2" Plastic End Cap
  • (1) 3' Deluxe Carrying Case 1700 Black
  • (1) 4' Deluxe Carrying Case 1750 Black

Gas Powered Hammer Specifications

  • BPM - 1720
  • Joules- 26
  • KW - 1.0 (1.3HP) at 7,000 rpm
  • 4-stroke, overhead cam
  • Trigger throttle with integrated stop button
  • Spring isolated hand grips
  • Fuel consumption - 0.71 L/h at 7,000 rpm
  • Meets strictest worldwide emission and noise req.
  • Starting system recoil (pull start)
  • Weight - 35 lbs.
  • Noise Level - >100dB Hearing protection required