Field test kit for quantifying total chlorine in used oil
- Dexsil - CLOR-D-TECT Q4000
U.S. EPA SW-846 Method 9077, ASTM Method D-5384
- To measure chlorine in crankcase oil, hydraulic oil, diesel fuel, lubricating oils
Clor-D-Tect Q4000, under USEPA SW-846 Method 9077, is used to determine quantitative chlorine levels in used oil
The kit determines the chlorine level of used oil over the range of 200 ppm to 4000 ppm. The kit has been proven invaluable when different oil lots are blended or when the user must know how close a quantity of waste oil is to the 1000 ppm or 4000 ppm action level. Clor-D-Tect Q4000 is a proven test to measure chlorine in crankcase, hydraulic, diesel, lubricating oils and virtually any hydrocarbon based solvent. The pocket-sized Clor-D-Tect Q4000 kit has all its premeasured reagents sealed in glass ampules for safe, consistent, and accurate results. The test is quick and easy to run, with results obtained in the field in less than 5 minutes with no special training.
NOTE: This product contains mercury, dispose of kits according to local, state or federal laws.
| Analytes | Chlorine, Chlorinated Organics |
|---|---|
| Matrix | Used Oil, Solvents, Organic Liquids |
| Detection Method | Quantitative colorimetric titration |
| Action Levels | 200 - 4000 ppm |
| MDL | 200 ppm |
| MQL | 600 ppm |
| Interferences | Sulfur may cause false positive results |
| Overall Accuracy | 10% +/- MDL |
| Analysis Time | 5 minutes |
| Catalog Number | Q4-000 |
| Packaging | 20 Kits to a shelf pack, 80 kits per case. Minimum order 10 kits. Orders greater than 10 kits must be in multiples of 20. |
Can we help you?
min 10 ch