The Elcometer 108 Hydraulic Adhesion Tester is an extremely versatile Type III adhesion gauge which can be used for many adhesion requirements.
Adhesion tests can be made on flat or curved (concave and convex) surfaces.
The Elcometer 108 adhesion tester is the ideal gauge for testing coatings on tanks, pipelines, etc.
- Hand-Powered and portable adhesion tester
- Ideal for site work
- Reusable stainless steel dollies
Elcometer Digital Adhesion Tester features:
- Maximum hold - displays the highest value reached
- Backlit display for dark areas
- Rubber protective casing
- Switchable Metric/Imperial units.
The Elcometer 108 adhesion tester can be used with convex and concave dollies, making this the gauge for adhesion of coatings on all pipelines including those with small diameter, tanks and other curved surfaces. There is a wide range of curved dollies available, each designed for a specific range of curvature.
Concave and convex dollies designed to meet specific curvatures are available upon request.
|Gauge Scale||0-25MPa (0-3500psi)|
|Metric (black scale)||± 0.5 MPa|
|Imperial (red scale)||± 50 psi|
|Gross weight||4.6kg (10lbs)|
|Size of the studs|
|Outside diameter||19,39mm (0.763 inch)|
|Inner diameter||3,73mm (0.147 inches)|
|Area||284mm2 (0.44 in2)|
|F108 --- 1A||(230V - UK plug)|
|F108 --- 1B||(230V - Europe plug)|
|F108 --- 1C||(110V - without plug)|
|Housing||520 x 370 x 125mm (20-1 / 2 x 14-1 / 2 x 5 in.)|
|Dolly OD||19.39mm (0.763 ") ID 3.73mm (0.147"); Area: 184mm2 (0.44in.)|
|Elcometer 108, 5 blocks shots, 5 nylon pads, 20g M2000 glue holder pads, hot clip, manual and carrying case|