EL1342-000
Test kit on Chloride Ion
Abrasive / Concrete
- Elcometer - 134A
- No need for needles
- This test does not contain mercury
Chlorides, deposited on a surface during sanding by contaminated abrasive can cause premature failure of the coating.
Contamination may accumulate. Particularly if the blasting medium is recycled several times. The Elcometer 134A is an accurate field test and easy to use, allowing you to determine if your abrasive is contaminated with chlorides and thus prevent costly surface defects.
Tests on the chloride ion can now be made quickly and accurately using a new extraction method, based on the solution CHLOR * EXTRACT ™.
Features:
- No need for needles
- This test does not contain mercury
EL1342-000 | Test kit on Chloride Ion abrasive / concrete Elcometer 134A |
:::::::::::::::::::::::: Discover more Elcometer Kits https://testcoatings.ca/product-category/coating-inspection/inspection-kits/ :::::::::::::::::::::::
Enclosure | Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP64. |
Dimensions | 9.5” L x 5.25” W x 5.875” H |
Weight | 3.8 Lbs (standard 4 gas with batteries) |
Detection Principle | Catalytic combustion, electrochemical cell, galvanic cell, infrared, |
photo ionization detector, and thermal conductivity. | |
Sensor Life | 2 Years under normal conditions. |
Sampling Method | Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH |
Display | 3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand with adjustable time. |
Language | Readout can display in 5 languages (English, French, German, Italian, or Spanish. |
Alarms | 2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable. |
Alarm Method | Buzzer 95 dB at 30 cm, four high intensity LED’s. |
Controls | 4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features. |
Continuous Operation | At 70°F, 16 hours using alkaline batteries, or 18 hours using Ni-MH. |
Power Source | 4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines). |
Operating Temp. & Humidity | -20°C to 50°C (-4°F to 122°F),0 to 95% RH, non-condensing. |
Response Time | 30 Seconds to 90% (for most gases) using standard 5 ft hose. |
Safety Rating | Intrinsically Safe, Class I |
Groups A, B, C, D.Approvals: CSA / CE | |
Standard Accessories | Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter |
Optional Accessories | Dilution fitting (50/50) |
Ni-MH batteries | |
Battery charger, 115 VAC, 220 VAC, or 12 VDC (charge time 4 hours) with continuous operation function | |
Extension hoses | |
Warranty | Two year material and workmanship, one year for PID sensor |
Do you have a question?
min 10 ch