Forney 1100KN automatic concrete press

with automatic controls (vfd) and standard frame (f)

Forney - 1100KN

Load capacity: 1100KN

Frame: Standard (F)

Testing system: VFD

Test types: Compression, bending, modulus of elasticity/Poisson's ratio (MP),crushing strength, tensile cracking

Test materials: cylinders, cubes, grout prism, beams, masonry blocks, retaining sand, rock core

QtyView Quote

Fast response from our specialists

Designed and built by Forney. These machines are ideal for the general laboratory because of their versatility.

Standard test machines have frames manufactured from solid steel in a single welded piece that exceeds ACI recommendations. All machines in the series are equipped with Lexan fragment protection doors for added safety.

ACCESSORIES
Cylinder compression (6" Dia x 12" L avec capuchons) (150mm x 300mm)	TA-0101 Cylinder top plate assembly (included with machine)TM-0095 Bottom plate assembly (included with machine) TM-2035 centring pin (included with machine)
Cylinder compression (6" Dia x 12" L with cover compound or ground ends) (150mm x 300mm)	TA-0101 Cylinder top plate assembly (included with machine) TA-0151 Bottom tray TM-2035 centring pin
Cylinder compression (100mm x 200mm) (4" Dia x 8" L with caps)	TA-0101 Cylinder top plate assembly (included with machine) TM-0095 Bottom plate (included with machine) MT-2035 centering pin (included with machine) TA-0173 Spacer, 4" H MT-2035 centering pin
Compression de cylindre (100 mm x 200 mm) (4" Dia x 8" L avec masse de recouvrement ou extrémités rectifiées)	TA-0101 Cylinder top plate assembly (included with machine) TA-0151 Bottom plate TA-0173 Spacer, 4" H (2) TM-2035 centering stud
Cylinder pull slot (6" Dia x 12" L) (150mm x 300mm)	TAG-0023 Kit de fractionnement des cylindres
Cylinder pull slot (100mm x 200mm) (4" Dia x 8" L)	TA-0107-01 Cylinder dividing accessory TM-0074 Lower platen TA-0171 Spacer, 2" H (2) TM-2035 centering pin
Cube (2") (50mm)	TAG-0017 Cube (2") Accessory kit
Cube (6") (150mm)	TAG-0025 Cube (6") Accessory kit
Flexion beam (6" x 6" x 18") (150mm x 150mm x 450mm)	TA-0166 Bending test accessory
Masonry block (8" ou 12" L x 8" H x 16" L) (200mm ou 300mm L x 200mm H x 400mm L)	TAG-0019 Block test kit * 8" x 8" x 16" PAS AU SPEC ASTM
Grout Prism (3" x 3" x 6") (75mm x 75mm x 150mm)	TA-0101 Cylinder top plate assembly (included with machine) TA-0151 Bottom tray TA-0174 Spacer, 6" H (2) Centring pin TM-2035
MOE (6" diameter) (150mm)	Compressor LA-0488-P6-SG Must have compression accessories Must have -M or -MP machine
MOE (4" diameter) (100mm)	Compressor LA-0488-P4-SG Must have compression accessories Must have -M or -MP machine
MOE Report & Fish (6" Diameter) (150mm)	LA-0488-P6-SG Compressometer/Extensometer Must have compression accessories Must have -MP machine
MOE report & Fish (4" diameter) (100mm)	LA-0488-P4-SG Compressometer/Extensometer Must have compression accessories Must have -MP machine
MOE report & Fish (diameter 2") (50mm)	TA-3542-03 Axial extensometer 2 TA-3975-01 Diameter 0.030". Must have compression accessories Must have -MP machine
Fiber Reinforced (FRC) Beam	TA-0166-10 FRC su

Specifications
Load capacity range	2,500lbf - 250,000lbf
Vertical opening	19.375"
Horizontal opening	9.25"
Ram diameter	6"
Piston stroke	2.5"
Platinum hardness	60 HRC
Bottom tray size	6,5" de diamètre
Top tray dimensions	6,5" de diamètre
Oil tank capacity	2 Gallons
Total width	30"
Overall depth	17"
Total height	58"
Unit weight	570lbs
Test Standard Ready	Cylindres ASTM C39 en compression (6" de diamètre x 12" de longueur, test de la coiffe du tampon) ASTM E4
Test Standard Capable	ASTM C39, C78, C293, C109, C469, C496, C1019, C1609, D7012 AASHTO T 22, T 97, T 106 ISO 13503-2 API RP 56 BS 1610, BS 1881, EN ISO7500-1, EN 12390-3, EN 12390-4