Materials Testing
 
    Forney F-1100KN Manual Compression Machine

Forney F-1100KN Manual Compression Machine

With manual override and standard frame (f)

  • Ideal for the testing lab because of their versatility and multi-language touchscreen interface. 

View Quote

Fast response from our specialists

Why buy from Geneq? - find out more


These Testing Machines have frames manufactured from solid steel into a one-piece, welded unit that exceeds ASTM, ACI, BS, EN and other international standards.

 All machines in the series have Lexan fragment guard doors for enhanced safety.


Frames

Our International Series Machines are backed by our International Sales & Service Team as well as a network of local Forney Certified Service providers.

*Optional machine stand available, TA-0142-01 sold separately

The load frame is manufactured from structural steel angles welded to top and bottom crossheads of solid steel plate. The hydraulic cylinder assembly is mounted to the top crosshead, with force being applied in a downward direction. This design eliminates foreign material build-up around the piston cylinder area.


Forney 1100kn

  • Load capacity: 1100KN
  • Frame: Standard (F)
  • Testing system: Manual
  • Test types: Compression, bending, modulus of elasticity/Poisson's ratio (MP),crushing strength, tensile cracking
  • Test materials: cylinders, cubes, grout prism, beams, masonry blocks, retaining sand, rock core


MATERIALS

Test hydraulic cement, down hole cement, mortar, grout, concrete, self-consolidating concrete, CLSM, flowable fill, ceramics, metals, and plastics.


HYDRAULIC

The hydraulic unit is supplied as a complete, fully integrated assembly. The unit is pre-piped and pre-wired. It incorporates hydraulic valves.

Single unit design permits easy installation and provides portability without disassembling of hydraulic or electrical components.


SAFETY FEATURES

Several safety features are incorporated to protect both operator and testing machine:


Fragment Safety Guard: Fragment guards with latches and hinges are mounted to both the front and rear of the compression frame. Fragment guards are made of Lexan® and permits clear viewing of the test in process.

*Optional Overextension Protection: A piston over-extension limit switch system protects against piston extension beyond maximum travel.


FACTORY INSTALLED OPTIONS

 Voltage

110/220VAC Single Phase

Capacity Options

 Dual Range (2 transducers) on Single Frame (2R)

Frame Options

Second Frame Capability (AB)

Dual Frame Capability (adds 250k de-rated frame to machine) (2F)

Dual Frame Capability (adds 30k frame setup for Concrete Beam) (BT)

 Travel Limit Switch

 Optional Equipment - TA-1237-09



Accessories
Cylinder Compression (6" Dia x 12" L with Pad Caps) (150mm x 300mm)

TA-0101 Cylinder Top Platen Assembly (included w/ machine)

TM-0095 Bottom Platen (included w/ machine)

TM-2035 Centering Stud (included w/ machine)

Cylinder Compression (6" Dia x 12" L with Capping Compound or Ground Ends) (150mm x 300mm)

TA-0101 Cylinder Top Platen Assembly (included w/ machine)

TA-0151 Bottom Platen

TM-2035 Centering Stud

Cylinder Compression (4" Dia x 8" L with Pad Caps) (100mm x 200mm)

TA-0101 Cylinder Top Platen Assembly (included w/ machine)

TM-0095 Bottom Platen (included w/ machine)

TM-2035 Centering Stud (included w/ machine)

TA-0173 Spacer, 4" H

TM-2035 Centering Stud

Cylinder Compression (4" Dia x 8" L with Capping Compound or Ground Ends) (100mm x 200mm)

TA-0101 Cylinder Top Platen Assembly (included w/ machine)

TA-0151 Bottom Platen

TA-0173 Spacer, 4" H

(2) TM-2035 Centering Stud

Cylinder Tensile Splitting (6" Dia x 12" L) (150mm x 300mm)TAG-0023 Cylinder Splitting Kit
Cylinder Tensile Splitting (4" Dia x 8" L) (100mm x 200mm)

TA-0107-01 Cylinder Splitting Accessory

TM-0074 Bottom Platen

TA-0171 Spacer, 2" H

(2) TM-2035 Centering Stud

Cube (2") (50mm)TAG-0017 Cube (2") Accessory Kit
Cube (6") (150mm)TAG-0025 Cube (6") Accessory Kit
Flexural Beam (6" x 6" x 18") (150mm x 150mm x 450mm)TA-0166 Flexural Testing Accessory
Masonry Block (8" or 12" W x 8" H x 16" L) (200mm or 300mm W x 200mm H x 400mm L)

TAG-0019 Block Testing Kit

* 8" x 8" x 16" NOT TO ASTM SPEC

Grout Prism (3" x 3" x 6") (75mm x 75mm x 150mm)

TA-0101 Cylinder Top Platen Assembly (included w/ machine)

TA-0151 Bottom Platen

TA-0174 Spacer, 6" H

(2) TM-2035 Centering Stud

Load Capacity Range

 
11kN - 1,100kN

Vertical Opening

 

19.625"

 

Horizontal Opening

 

9.25"

 

Ram Diameter

 

6"

 

Piston Stroke

 
2.5"

Platen Hardness

 

60 HRC

 

Lower Platen Dimension

 
6.5" Diameter

Upper Platen Dimension

 
6.5" Diameter
Oil Reservoir Capacity2 Gallons
Overall Width

30"

 

Overall Depth

17"

Overall Height

58"

Unit Weight

570lbs

Test Standard Ready

ASTM C39 Cylinders in Compression (6" diameter x 12" length, pad cap tesing)

ASTM E4

 Test Standard Capable 

ASTM C39, C78, C293, C109, C496, C1019

AASHTO T 22, T 97, T 106

BS 1610, BS 1881, EN ISO7500-1, EN 12390-3, EN 12390-4