Horizontal Air Flow Cabinet OvensHorizontal Air Flow Cabinet Ovens

Horizontal Air Flow Cabinet Ovens

  • Grieve - HA-550, HA-700, HA-850, HX-550 and more
  • Motor control push buttons and on-off heat switch
  • LED pilot lights
  • 5 kA short circuit current rating (SCCR)

View Quote

Can we help you?

Horizontal air flow ovens provide exceptional temperature uniformity as air flow passes heated air across each shelf level for closely controlled production work.


Certifications

  • UL Listed Control Panel
  • Meets the Requirements of the Following Standards:
  • NFPA 86 (Standard for Ovens and Furnaces)
  • NFPA 70 (National Electric Code)
  • FM (Factory Mutual)
  • OSHA

Caution:

  • When processing combustible material fire protection should be considered
  • Processing flammable solvents or vapors requires forced exhaust to provide safety ventilation

Safety Equipment

  • Adjustable manual reset excess temperature interlock to turn off heat on malfunction of main temperature controller
  • Recirculating blower air flow safety switch to turn off heat on loss of recirculated air flow
  • Electrical interlock shuts off heat if power to recirculating blower is interrupted

Electric Heat Includes

  • Separate heating element control contactors to turn off heat on malfunction of main control contactors

Gas Heat Includes

  • Modulating burner for 1000 BTU per cubic foot natural gas at 6” water column pressure – propane available. Inlet 1” NPT
  • Automatic pre-ignition purge period to clear accumulated gas or fumes
  • Push button electric ignition
  • Microprocessor based electronic flame safeguard protection to continuously monitor flame and close gas valves if flame is not present
  • 325 CFM powered forced exhauster to provide combustion venting
  • Exhauster air flow safety switch to close gas valves on loss of venting
  • Two pilot valves to guarantee gas flow to pilot can be stopped
  • High and Low gas pressure switches to confirm safe operating pressure range
  • Two main burner safety shut off valves with valve seat position indicator to assure gas flow to main burner can be stopped
  • Proof of closure switch on one main valve to prevent igniting pilot unless main valve is closed
  • Leak test station at each pilot and main burner valve to allow testing for leakage through valve


Controls

  • Digital temperature controller
  • Motor control push buttons and on-off heat switch
  • LED pilot lights
  • 5 kA short circuit current rating (SCCR)

Construction

  • Choice of
* Electric or Gas heat
*208 volt, 230 volt or 460 volt, 3-phase, 60 HZ – other input power available
  • All welded construction
  • Durable, electrically isolated, Incoloy tubular heating elements
  • Heat source located in heat chamber to prevent radiant heating
  • High pressure carbon steel recirculating blower
  • Full coverage supply and return duct work with adjustable opposed louvers
  • Adjustable fresh air intake and 4” diameter (6” on Gas Heat) exhaust outlet damper
  • Channel shelf supports prevent shelves tipping
  • Insulated with 10 lbs per cubic foot density rockwool insulation
  • 304 stainless steel interior with plated hardware
  • Aluminized steel exterior with Trilite Green enamel finish
  • Brushed stainless steel control panel face
  • Heavy duty doors with explosion venting latches
  • Fiberglass door gasket with stainless steel spring insert
  • Slip flashing at doorway to allow inner oven to expand without affecting door sealing
  • Fully assembled and factory tested for temperature uniformity

*** CAUTION:  Ovens processing combustible material are required by National Fire Protection Association 86 Standard for Ovens and Furnaces (NFPA 86) to have a fire suppression system.  If flammable solvents or vapors are present in an oven, OSHA requires conformance with NFPA 86 Class A Oven requirements.  A powered forced exhauster and other non-standard safety equipment must be added.

MODELWORKSPACEOUTSIDE DIMENSIONS*(WXDXH)MAX TEMPBLOWERHEAT INPUTINSULATION THICKNESSOPERATING CHARACTERISTICS†APPROX SHIPPING WEIGHT
DIMENSIONS(WXDXH)VOLUMECU FTCFMHPELECTRICKWGASBTU/HRCONTROL ACCURACYTEMPERATURE UNIFORMITYRISE TIME (ELECTRIC)RISE TIME (GAS)
HA-55020" x 20" x 20"4.640" x 36" x 58"550°F4006Not Rated6"±0.3%±4°F2012805 lbs
HA-70020" x 20" x 20"4.644" x 40" x 62"700°F4008132,0008"±0.3%±5°F2215970 lbs
HA-85020" x 20" x 20"4.644" x 40" x 62"850°F600½10132,0008"±0.3%±7°F40251,030 lbs
HX-55038" x 20" x 26"11.458" x 36" x 64"550°F600½8132,0006"±0.3%±4°F37241,375 lbs
HX-70038" x 20" x 26"11.462" x 40" x 68"700°F600½10132,0008"±0.3%±5°F33211,505 lbs
HX-85038" x 20" x 26"11.462" x 40" x 68"850°F600½15132,0008"±0.3%±7°F45271,555 lbs
HB-55038" x 26" x 38"21.758" x 42" x 76"550°F600½10132,0006"±0.3%±4°F38221,590 lbs
HB-70038" x 26" x 38"21.762" x 46" x 80"700°F600½15132,0008"±0.3%±5°F40241,900 lbs
HB-85038" x 26" x 38"21.762" x 46" x 80"850°F800¾20200,0008"±0.3%±7°F45301,950 lbs
HZ-55038" x 26" x 50"28.658" x 42" x 88"550°F800¾15132,0006"±0.3%±4°F40241,975 lbs
HZ-70038" x 26" x 50"28.662" x 46" x 92"700°F800¾20200,0008"±0.3%±5°F42272,305 lbs
HZ-85038" x 26" x 50"28.662" x 46" x 92"850°F1,000130200,0008"±0.3%±7°F44362,455 lbs
HY-55038" x 38" x 38"31.858" x 54" x 76"550°F800¾15132,0006"±0.3%±4°F42252,180 lbs
HY-70038" x 38" x 38"31.862" x 58" x 80"700°F800¾20200,0008"±0.3%±5°F44292,540 lbs
HY-85038" x 38" x 38"31.862" x 58" x 80"850°F1,000130200,0008"±0.3%±7°F46382,710 lbs
HC-55050" x 50" x 50"72.374" x 66" x 90"550°F2,4501 ½30200,0006"±0.3%±4°F25243,485 lbs
HC-70050" x 50" x 50"72.376" x 68" x 92"700°F2,4501 ½40200,0008"±0.3%±5°F30293,905 lbs
HC-85050" x 50" x 50"72.378" x 70" x 94"850°F3,300260350,0008"±0.3%±7°F30254,230 lbs