H-2285-000
Distillation Set
for Residue and Oil Distillate in Emulsified Asphalts
- Humboldt - H-2285
ASTM D244, AASHTO T59
Use of this set will allow the user to accurately determine the representative portion of residue in emulsified asphalts.
Two models are available, The H-2285 uses the large H-2345 still and the H-2290 uses the small H-1871 still. For a detailed explanation of the test procedure refer to the ASTM or AASHTO standards listed above. The complete set is comprised of the items listed in the chart below.
Order necessary ASTM mercury thermometer.
Distillation Set Components
- Still, aluminum, small: H-1871
- Ring burner: H-1876
- Support stands: (2 in set) H-21212
- Support stand: H-21232
- Support shelf: H-21700
- Burner: H-6220
- Condenser: H-2340
- Graduated cylinder: H-4915.100
- Tube shield: H-2330
- Straight glass tube: H-2290B
- Bent glass tube: H-2290A
- Adapter: H-1910.4
- Clamp, brass: H-8325
- Clamp: H-8390
- Clamp holders (2 in set): H-8342
- Clamp: H-8522
- Rubber tubing: H-4998
- Still stopper (1): H-2345TTS
- Stopper, ptfe: H-2345TS
- Stoppers, rubber: (2) H-2340RS
- Stopper, rubber: H-1910.7S
Standards
ASTM D6997, AASHTO T59
Accessoiries
P/N | Description | |
H-1876 | ![]() | Ring Burner |
H-2290A | Bent Glass Tube | |
H-2290B | Straight Glass Tube | |
H-2330 | ![]() | Connecting Tube Shield |
H-2340 | ![]() | Condenser Jacket |
H-2345 | ![]() | Still, Aluminum, Large |
H-4915.100 | Glass Graduated Cylinder; Capacity: 100ml | |
H-6220 | ![]() | General Purpose Tirril Burners - General Purpose Tirrill Burner with flame stabilizer, Natural gas, 7/16"(11mm) Mixing Tube OD, 5.5 CFH, 5,638 BTU Output, 6" (152mm) Overall Height |
H-8300 | ![]() | Clamp Holders - Clamp Holders for Extension Rings. Standard (Die-cast aluminum) with 1/4" steel thumbscrews |
H-8342 | ![]() | Clamp Holders - Adjustable: Aluminum, with 1/4"-20 steel thumbscrews. Swivels and locks to any angle |
H-8390 | Universal (Swivel Jaw) Extension Clamps - Universal (Swivel Jaw) Extension Clamp, Large Jaw Model, Swivel Jaws of stamped steel; forged steel handle, 3/8" dia. with Plastisol-coated Jaws. For Condensers and irregular shapes. Jaw Opening to 3" (51mm),10"(254mm) Length | |
H-8522 | Clamp | |
H-18355 | Wire Support Rings - Wire Support Ring. 5", 4-5/8"(118mm) ID, 5-1/8"(131mm) OD. | |
H-21212 | ![]() | Powder-coated Black finish, stamped steel base with plated steel rod - Powder-coated Black finish, stamped steel base with plated steel rod. 5 x86" (127 x 203mm) Base, 1/2 x 36" (H-21370) Rod |
H-21232 | ![]() | Powder-coated Black finish, stamped steel base with plated steel rod - Powder-coated Black finish, stamped steel base with plated steel rod. 6 x116" (152 x 279mm) Base, 1/2 x36" (H-21370) Rod |
H-21700 | ![]() | Support Shelf |
Do you have a question?
min 10 ch