Nuclear Density Gauge

Nuclear Density Gauge

  •  To measure density through direct transmission and backscatter modes

View Quote

Fast response from our specialists

Why buy from Geneq? - find out more

Do you have a question?

Humboldt’s HS-5001EZ Moisture/Density Gauge is just that— easy. Easy to operate, easy to power and easy to service.

The EZ gauge features a menu-driven control panel with easy-to-use, built-in test routines and auto features, making testing a quick and accurate operation. It also features our innovative trigger release handle that eliminates pinched fingers while providing smooth operation. Available in 8" (200mm) and 12" (300mm) lengths with either 1" (25mm) or 2" (50mm) increments, the EZ gauge provides a single gauge solution to density and moisture measurements.

The EZ’s versatility allows it to measure density through direct transmission and backscatter modes, as well as including thin lift and trench modes, as well as moisture determinations. The gauge uses an advanced micro-processor-based technology to provide highly-accurate measurements of density and moisture that are automatically computed for direct readouts of wet density, dry density, moisture content, percent of moisture, percent of compaction (Proctor or Marshall),void ratio and air voids. The EZ Gauge complies with all pertinent standards: ASTM D6938, D2950, C1040 and AASHTO T310. The gauge is calibrated by the Five-block calibration method.
 

Moisture/Density Gauge— HS-5001EZ121

  • Measures to 12" (300mm) depth in 1" (25mm) increments.

Moisture/Density Gauge— HS-5001EZ122

  • Measures to 12" (300mm) depth in 2" (50mm) increments.

Moisture/Density Gauge— HS-5001EZ081

  • Measures to 8" (200mm) depth in 1" (25mm) increments.

Moisture/Density Gauge— HS-5001EZ082

  • Measures to 8" (200mm) depth in 2" (50mm) increments.


    Easy to Operate

    Humboldt’s HS-5001EZ Moisture/Density Gauge is just that— easy to operate. The EZ gauge features a menu-driven control panel with easy-to-use, built-in test routines and auto features, making testing a quick and accurate operation.

    Easy to Power

    The EZ is powered by six standard AA alkaline batteries, which provide up to 2000 hrs of service. No chargers are needed and you can buy batteries almost anywhere, including the corner convenience store.

    Easy to Service

    The EZ gauge also uses a modular design, which allows it to be serviced in the field, if ever necessary. With this gauge, you don’t have to send it back to the factory for repairs, we’ll send you the necessary components and walk you through any repair procedure.

    Radioactive Materials Data Needed for License Application
    Radioactive MaterialChemical/Physical FormMaximum Amount
    Cesium-137Sealed Source
    Humboldt 2200064    		Not to exceed 11
    millicuries per source
    Americium-241:BeSealed Source
    Humboldt 2200067    		Not to exceed 44
    millicuries per source
    Measurement: Density at 125 pcf (2000 kg/m3)
    Direct Transmission, 6" (150mm)15 seconds (Fast)1 minute (Std.)4 minutes (Slow)
    Precision, pcf (kg/m3)±0.5 (8)±0.25 (4)±0.13 (2)
    Chemical Error, pcf (kg/m3)±1.0 (16)±1.0 (16)±1.0 (16)
    Surface Error, pcf (kg/m3)-0.5 (8)-0.5 (8)-0.5 (8)
    Measurement Depth: 2 to 12" (50 to 300mm)
    Backscatter, 3.5" (88mm)15 seconds (Fast)1 minute (Std.) 4 minutes (Slow)
    Precision, pcf (kg/m3)±1.0 (16)±0.5 (8)±0.25 (4)
    Chemical Error, pcf (kg/m3)±2.5 (40)±2.5 (40)±2.5 (40)
    Surface Error, pcf (kg/m3)-3.0 (48)-3.0 (48)-3.0 (48)
    Measurement Depth: 3.5" (88mm)
    Moisture at 10pcf (160kg/m3)15 seconds (Fast)1 minute (Std.)4 minutes (Slow)
    Precision, pcf (kg/m3)±0.5 (8)±0.25 (4)±0.13 (2)
    Surface Error, pcf (kg/m3)-0.25 (4)-0.25 (4)-0.25 (4)
    Measurement Depth: 4-8" (100 to 200mm)
    Radiological
    Gamma Source
    Material, Type and AmountCs-137, 370MBq (10mCi)
    Special Form RegistrationUSA/0634/S
    ANSI and ISO ClassBelow 7000 S/N USA/0634/S
    Above 7000 S/N USA/0356/S
    Neutron Source
    Material, Type and AmountAm-241: Be, 1.48GBq (40mCi)
    Neutron Yield90 Knps ±10%
    Special Form RegistrationUSA/0632/S
    ANSI and ISO ClassBelow 7000 S/N USA/0632/S
    Above 7000 S/N CZ/1009/S
    Source
    TypeSealed Source, Special Form
    HousingStainless Steel, Double Encapsulated
    Surface Dose Rates18.7 mrem/hr Maximum (Neutron and Gamma)
    Transit (shipping) CaseDOT 7A, Type A, Yellow II Label, O.2 TI
    Electrical
    Displays4 lines x 20 alphanumeric w/ backlit liquid crystal
    Timer Stability0.01%
    Power Supply Stability0.10%
    Power SourceSix alkaline AA-size batteries
    Power ConsumptionActive — 6.5mA Battery Life — 1400 hours
    Power ProtectionMain Batteries — Circuit Breaker
    Regulated Supplies — Short Circuit Proof
    Low Battery ConditionLOBAT Alarm and Auto Shutoff for low and dead battery conditions
    Battery Life RemainingAutomatically Estimated at Power-up by activating TEST routine
    Mechanical
    Operating Temperature14 to 158°F (-10 to 70°C) ambient, 347°F (175°C) Material Surface
    Storage Temperature-70 to 185°F (-55 to 85°C)
    Humidity98% without condensation, Rain-Resistant Construction
    Vibration0.1" (2.5mm) at 12.5 Hz
    Materials
    ShieldingTungsten Powder Alloy
    Source Rod440C Stainless steel, Induction, heat treated to 55 Rockwell C
    Gauge BaseComputer-Machined 6061-T6 Aluminum, Hard-Coated and Teflon Impregnated
    Post and FrameComputer-Machined 6061-T6 Aluminum, Anodized for Anticorrosion
    Index Rod7075 aluminum, Hard Coated and Teflon Impregnated
    Top ShellInjection-Molded Noryl with Integral Color
    BearingRelieved Bronze with Neoprene Seals
    Screws/FittingsStainless Steel and Brass
    Dimensions/Weight
    Gauge
    Dimensions (base)15.75" x 8.66" x 5.5" (400 x 220 x 140mm)
    Handle Height18" or 21.5" (450 or 550mm)
    Weight30 lbs (13.6kg)
    Reference Standard
    Dimensions25" x 7.8" x 3" (350 x 200 x 75mm)
    Weight10 lbs (4.5kg)
    Transit Case
    Dimensions31" x 14" x 19.5" (787 x 356 x 495mm)
    Weight31 lbs (11.8kg)
    Accessory Case (loaded)
    Dimensions19.7" x 9.8" x 5" (500 x 250 x 125mm)
    Weight16 lbs (7.3kg)
    Total Shipping Weight90 lbs (41kg)
    All models Include:
    Gauge, Reference Standard, Source and Case Certification, Wipe Test Kit, Rod Guide/Scraper Plate, Drill Pin, Four Pound Hammer, Pin Extraction Tool, Zippered Accessory Case, Transit Case, Radiation Safety Manual and Operator’s Manual.