Test de dépistage du chlore total dans l'huile usée

Test de dépistage du chlore total dans l'huile usée

ASTM D-5384, U.S. EPA SW-846 Method 9077

Voir la soumission

On est là pour vous aider!

On-Site Test Kit for Total Halogens in Used (Waste) oil

CLOR-D-TECT 1000 provides a "go, no-go" result at a level of 1000 ppm chlorine. Used oil transporters, generators and facilities that recycle or re-refine used oil can incorporate Clor-D-Tect 1000 into their management of waste oil to prevent costly hazardous waste from being mixed with non-contaminated oil. Generators can identify and label their waste oil, hazardous or non-hazardous, for proper management and disposal. 

Designed for use on-site, the test takes less than 5 minutes to run with no special training. Each kit comes complete to perform one test, and all premeasured reagents are sealed in glass ampules. Clor-D-Tect 1000 has proven to be an ideal test to spot-check oil before it is transported, accepted or introduced into larger holding tanks. 

Clor-D-Tect 1000 has been assigned ASTM Method D-5384 and USEPA SW-846 Method 9077. 

AnalytesChlorine, Chlorinated Organics
MatrixUsed Oil, Solvents, Organic Liquids
Detection MethodFixed endpoint colorimetric titration
Action LevelsAbove or below the 1000 ppm regulatory limit
InterferencesSulfur may cause false positive results
Analysis TimeLess than 5 minutes
Catalog NumberCD-DET
Packaging20 Kits to a shelf pack, 80 kits per case. Minimum order 10 kits. Orders greater than 10 kits must be in multiples of 20.