- Global Water - WMX101
The WMX101-Series flanged magnetic flow meters are the perfect replacement for your old industrial mechanical turbine or propeller flow meters.
Because they have no rotor to stop turning or bearings to wear out the WMX industrial magnetic flow meters are virtually maintenance-free, especially in applications where debris or sand would foul most industrial mechanical flowmeters. WMX101-Series flanged magnetic flow meters are also designed work with minimal straight pipe run requirements, which is great when you have very little space between the meter and an elbow.
The WMX101-Series flanged magnetic flow meters’ electronics are housed in a rugged NEMA 4X aluminum enclosure with a 2-line LCD that clearly displays the flow rate and totalizer. The WMX industrial magnetic flow meters have a solid state pulse output that allows connection to a variety of devices such as a FT420 remote display, PLC, telemetry system or data logger. A pulse-to-analog converter can be added if a 4-20 mA signal is needed from the magnetic flow meter. The WMX101 industrial magnetic flow meters are externally powered from a 12-24 VDC power supply, and their low power requirements make them ideal for solar powered applications. A shielded power/pulse output cable with DIN connection is included with the magnetic flow meter. The industrial magnetic flow meters' display housing is fitted with tamper-evident features.
The display units of the standard WMX magnetic flow meter models listed below are in US Gallons and cannot be changed in the field. However, you may request one of the following available flow meter displays: Rate: MGD, CFM, Liters/Minute; Total: Cubic Feet, Cubic Meters, Megaliters.
|Pipe Sizes||4", 6", 8", 10"|
|Flow Range||4" 12-500 GPM
6" 32-1200 GPM
8" 60-2200 GPM
10" 95-3500 GPM
|Flanges||AWWA 150 lb. drilling|
|Pressure||150 PSI working pressure|
|Temperature Range||10º F to 130º F (-12º C to 55º C)|
|Accuracy||+1% at 100% to 10% of reading
+2% at 10% of reading to cut off
|Materials||Body: Welded steel, epoxy powder coated
Electronics Housing: Die cast aluminum, powder coated
Electrodes: 316 stainless steel
|Rate Display||6-digits in units of GPM (standard), MGD, Liters/minute, CFM|
|Totalizer Display||8-digits in units of Gallons x 1000, CU Feet, CU Meters, Megaliters|
|Power||101: 12-24 VDC, 30 mA
104: 2 Lithium 3.6V “D” batteries, replaceable, 3 year life
|Output Signal||Current sinking pulse, opto-isolated, 24 VDC, 10 mA max|
|Empty Pipe Detection||Hardware/software, conductivity-based|
|Environmental||NEMA 4X standard, (optional short-term immersible)|