Size Selective High Volume Air Sampling Systems
- Complete Systems Designed to Meet or Exceed U.S. EPA Federal Reference Method Performance Specifications for PM-10 Sampling
- Three High Performance Systems to choose from
- Brushless & Brushed Motor Driven 2 & 3-Stage Blowers Available
- NIST Traceable Flow Calibration
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 ug/m3 of particles with aerodynamic diameters less than 10 microns. The standard has been deemed PM-10, particulate size of 10um. Adherence to this standard is most important in industries and environments which produce a large mass of PM-10’s such as mills, mines, and biomedical facilities.
HI-Q Environmental Products Company offers five complete PM-10 sampling systems designed to meet or exceed U.S. EPA Federal Reference Method performance specifications for the collection of PM-10 in ambient air. Each of the five systems incorporates the same size selective inlet mounted on top of any of HI-Q’s five High Volume, Outdoor, TSP Air Sampling Systems depicted on the previous pages. The inlet is designed to sample at a flow rate of 40 CFM.
PM10-4300AFC (3-Stage)& PM10-4200AFC (2-Stage)
Automatic/PID Mass Flow Control, PM-10 HI-Vol Air Sampling System, 115 VAC, with PLC controlled 3 or 2 Stage Brushless Blower. Unit includes 8” x 10” filter paper holder, 8” x 10” paper cartridge and PM-10 Size Selective Inlet. Standard Units are SCFM. See HVP-4300/4200AFC Series samplers for complete description & available options.
PM10-3300BRL (3-Stage)& PM10-3000BRL (2-Stage)Manual Speed Control, Brushless 3 or 2 Stage Blower, PM-10, High Vol Air Sampling System. 115VAC. Unit includes 8”x10” filter paper holder, 8” x 10” paper cartridge and PM-10 Size Selective Inlet. Standard Units are ACFM. See HVP-3300/3000BRL Series samplers for complete description & available options.
PM10-2000Manual Speed Control, Brushed Motor Blower PM-10, HI-Vol Air Sampling System. 115 VAC. Unit includes 8” x 10” filter paper holder, 8” x 10” paper cartridge and PM-10 Size Selective Inlet. Standard Units are ACFM. See HVP-2000 Series samplers for complete description & available options.
PM10-4300AFC/230, PM10-4200AFC/230, PM10-3300BRL/230, PM10-3000BRL/230, & PM10-2000/230 are the 230 Volt versions of units described above
Mechanical 7 Day Skip Timers
Programmable Electronic Timer
Continuous Flow/Pressure Recorder
Cabinet Stabilizer Set
Exhaust Tubing, Silicone
Silicone Release Spray for shim plate
Additional 8”x10” paper cartridge
|Motor/Pump:||PM10-5300AFC: Brushless, Electronic
PM10-5200AFC: Brushless, Electronic Control/2-Stage.
PM10-4300AFC: Brushless, Electronic Control/3-Stage.
PM10-4200AFC: Brushless, Electronic Control/2-Stage.
PM10-3300BRL: Brushless, Mechanical Control/3-Stage.
PM10-3000BRL: Brushless, Mechanical Control/2 Stage. PM10-2000: Brushed, Mechanical Control/2-Stage.
|Housing:||Anodized Aluminum Outdoor Shelter with lockable control panel door. See
HI-Q’s HVP-2000 & PM10-HEAD for overall|
cabinet & Size Selective Inlet dimensions.
|Calibrated Flow Range:||10-50 CFM (CMM unit calibration upon request).|
NIST Traceable Calibration.
|Unit Net Weight:||~50 lbs. Cabinet Weight (avg.). 44 lbs. Size Selective Inlet.|
|20” x 20” x 50” @ 58 lbs. Cabinet Carton (avg.).|
32” x 32” x 26” @ 52 lbs. Size Selective Inlet Carton.
|115 VAC, 50/60 Hz.,10 Amp, 800 Watt|
230 VAC, 50/60 Hz., 10.5 Amp, 1200 Watt
|115 VAC, 50/60Hz., 5.0 Amp, 250 Watt|
230 VAC, 50/60Hz., 5.0 Amp, 400 Watt
|115 VAC, 50/60Hz., 9.0 Amp, 300 Air Watts|
230 VAC, 50/60Hz., 4.6 Amp, 269 Air Watts
|Electronic, Resettable Hours & Tenths of Hours,|
LCD read out, 5 year internal battery.
(PM10-4300& 4200 only)
|Resettable Standard Cubic Feet|
(total volume in cubic meters or liters upon request)
(PM10-4300 & 4200 only)
|Standard Cubic Feet per Minute|
(SCCM or SLPM display upon request)