Anémomètre sans fil
- IED - Anemo4403 RF
Robust wind speed sensor, extremely resistant and flexible, probably one of the best wind sensors in the market.
Suitable for many different applications.
Developed to be connected to display WM44-P RF. Plug & Play. No user configuration needed. More than one ANEMO4403 RF + WM44-P RF can operate in the same area, with no risk of interaction/interference.
Made with high quality materials. Body and cup anemometer are manufactured in technical plastic. Bearings manufactured in stainless steel.
|Anemo4403 RF has been designed for home and industrial applications: cranes, buildings, PV panels, wind turbines, weather stations, green houses...|
|Each Anemo4403 RF must be supplied with an associated WM44-P RF display. Powering WM44-P RF is the only
requirement to visualize the wind speed from its associated Anemo4403 RF.
Inputs / Outputs
From 2 to 200Km/h wind speed.
RF Communication, compliant to IEEE 802.15.4, 2.4 GHz.
|Power supply||from 9 to 24 Vdc|
|Power consumption||< 1W|
|RF communication||IEEE 802.15.4. ISM 2.4 GHz
Power transmission: 10mW (10dBm)
Sensibitiy reception: -100dBm
|Communicating range||Indoor/Urban : 60 m max.
Outdoor. Direct vision : 750 m max.
|Measure range||from 2 to 200 km/h|
|Starting speed||8 km/h|
|Transmission timing||2 sec|
|Storage temp.||-35 ºC ... +70 ºC|
|Operating temp. (ice free)||-20 ºC ... +70 ºC|
|Power supply wiring||Red : V+
Black : V
Yellow : NC
|Weight, 20m cable included||1270 g approx.|
|Weight||160 g approx.|
|Power supply||Anemo4403 RF and WM44-P RF long range|
Indoor/Urban: up to 60 m
Outdoor. Direct vision: up to 750 m
Also available in kit with display WM44-P RF