Abris ventilés contre la radiation solaire

Abris ventilés contre la radiation solaire

Voir la soumission

Réponse rapide par nos spécialistes

Avantages de faire affaire avec Geneq - en savoir plus

The 076B Fan Aspirated Radiation Shield protects temperature and humidity sensors from direct and indirect radiant energy.

Used in the most adverse conditions, the 076B eliminates errors caused by solar or terrestrial radiation, as well as secondary errors caused by convective heat transfer from the outer shield surfaces. It continuoulsy samples ambient air to support high accuracy temperature and differential temperature measurements. It is the best aspirated shield available on the market. A humidity sensor can be installed in the shield for combined measurements.


  • The shield is constructed of aluminum and other corrosion-resistant materials
  • All outer surfaces are painted with high-gloss epoxy enamel for maximum reflectivity
  • All interconnecting materials minimize conductive heat transfer


Air is drawn into the bottom of the sensor housing through two concentric ports. The air sample moves at high velocity through the outer port and scrubs the outer surfaces as it is exhausted. The inner port then draws in the sample, enabling a true gas temperature measurement to be made.


Operating Characteristics
Aspiration: Electric fan
Flow Rate: 1000 ft/min scrubbing 500 ft/min sample
Temperature Range: Standard -50°C to +85°C (-67°F to 185°F)
Optional -50°C to +100°C (-67°F to 212°F)
Power Required:115 VAC 20 watts
12 VDC 250 mA
220 VAC 18 watts
Maximum Number:Four
Models Numbers 060/062/083/T-200A
Maximum Diameter: 0.75 in (1.9 cm)
Maximum Length: 10 in (25 cm)
Transducer Sensing Zone: 8 in (20 cm)
Physical Characteristics
Weight, less sensor(s): 9.3 lbs (4.2 kg)
Dimensions: 20 in (51 cm) h x 20 in (51 cm) diam
Cables & Mounting
Signal: PN 2144 Cable Assembly; specify length in feet or meters
AC Power: PN 1954 Cable Assembly; specify length in feet or meters
DC Power: PN 2423 Cable Assembly; specify length in feet or meters
Mounting: Mounts to 3/4 in. IPS horizontal pipe
Ordering Informations
Model 076B-1: 115 VAC
Model 076B-4: 12 VDC
Model 076B-11: 220 VAC
Order model number corresponding to voltage requirement.