Moniteur fixe de radiation

Moniteur fixe de radiation

Voir la soumission

On est là pour vous aider!

The Radiation Alert® Area Monitor is one of the most user friendly, all inclusive, state of the art radiation area monitors available

The easy to use interface is an intelligent resistive touch screen display featuring a large five digit LED readout. It comes with either an internal or external detector and free software for monitoring every Radiation Alert® Area Monitor on your network. Includes user selectable warning indicators for low and high radiation alarm levels, low battery, detector failure, and email and text alerts. All the settings are stored internally, even when power is disconnected. All units are electronically calibrated at the factory. NIST source calibrations available upon request.



Range options
  • AM-7149: 0.2 - 16,000 mR/hr (2.0 - 160,000 μSv/ hr) Using an Internally Mounted LND 7149 Energy Compensated GM Detector. External mounting also available
  • AM-7128: 15μR/hr – 200 mR/hr (0.2 - 2000 μSv/ hr) Using an Internally Mounted LND 7128 Energy Compensated GM Detector. External mounting also available
  • AM-71313: 0.1 to 1500 mR/hr (0.5 - 15,000 μSv/ hr) Using an Internally Mounted LND 71313 Energy Compensated GM Detector. External mounting also available
  • AM-1X1NAI: 1 μR/hr to 500 mR/hr (0 μSv/hr – 5 mSv/hr) Using an Externally Mounted 1X1 NaI(Tl) Scintillation Probe 
  • AM-2X2NaI: 0.1 μR/hr to 75 mR/hr (0 – 750 μSv/hr) Using an Externally Mounted 2X2 Nal(Tl) Scintillation Probe

Max cable lenghts

GM Probes - 100ft, Scintillation Probes - 50ft
Touch screen display5-digit 4.3 inch TFT 480x272 touch screen LED display
Base display unitsCan display in μR/hr, mR/hr, μSv/hr, mSv/hr, cpm, Kcpm, cps, and Kcps
ResponseVaries automatically from 20 seconds to 2 seconds
IndicatorsUltra-Bright Strobe and Audible Alarm. Can trigger up to three relays with DB-9 serial connection. USB VCP for computer data logging, which can also be used to control the unit with use of remote software for alarm indication and acknowledgment (Silence by remote)
Ethernet10 Base-T connection for use with remote software for alarm indication and acknowledgment (Silence by remote)
Calibration controlsFunctions accessible through touch screen push button under calibration cover enables secure access to changing settings
High voltageUser adjustable from 200 to 1200 volts
Dead timeUser adjustable to compensate for dead time of the detector and electronics
Power12 VDC (110/220) wall mount adapter with four sets of international adapters for almost any style wall receptacle
Battery lifeTypically 7.5 hours in non-alarm condition; 6 hours in alarm condition
Battery chargerBattery is continuously trickle charged when the instrument is connected to line power and turned on
ConstructionEasy mount steel enclosure
Temperature range-10 to 60 °C (14 to 140 °F)
Size16.2 x 26.6 x 5.3 cm (6.4 x 10.5 x 2.1 in.)
Weight84.8 oz (5.3lbs) Without Probe and Cable
IncludesManagement software for use with networked area monitors, base Unit, Power Supply, CD with Software and Operation Manual, Mounting Clips (External Versions Only),C to C Cable (External Versions Only)
OptionsExternal Strobe and Horn, External Detector