• Contrôleur pour pompe souterraine
SO109560-0

Contrôleur pour pompe souterraine

  • Idéal pour utilisation avec pompes à vessie
  • 99 préréglages personnalisables d'échantillonnage 
  • Mode d'utilisation automatique ou manuel
SO109560-0

Modèle : SO109560-0

  • 125 psi
  • 5 lbs (2,3 Kg)

SO109966-0

Modèle : SO109966-0

  • 250 psi
  • 7,8 lbs (3,5 Kg)



Simple to Operate Pump Controller

The Model 464 Electronic Control Unit uses 4 AA batteries and provides 125 psi output. It is fully automatic with preset sample modes from low through high flow settings. In addition, up to 99 unique user-created flow rates can be saved in FRAM memory. The Controller can also be operated manually, which means that even if your batteries run out while you are in the field, you can still obtain a groundwater sample with your compressed air source. The Controller allows faster purge rates and precise low flow control to ensure a representative sample at 100 ml/min or less when sampling for VOCs. Also available, for higher pumping pressures. These convenient boxes are rugged, dependable and suitable for all environments. Quick-connect fittings allow instant attachment to dedicated well caps, portable reel units and to an air compressor or compressed gas source.

Operating Principles

The Model 464 Electronic Control Unit controls the supply of compressed gas to pneumatic pumps. Drive (pressure) and vent periods are cycled to provide water flow. During pressurization periods water is forced into the sample tubing. The Vent period allows water to re-enter (recharge) the pump. Cycle repetition may be controlled manually or automatically using pre-set pumping rates.

  125 psi 250 psi
Operating Temperature: -20ºC to 50ºC
Weight: 5 lbs (2.3 Kg) 7.8 lbs (3.5 Kg)
Dimensions: 9.1 x 10.2 x 4.9" (23 x 26 x 12 cm)
Drive/Vent Time Range: 1-999 seconds
Maximum Site Name Length: 16 characters (upper or lowercase and numeric)
Memory Capacity: 99 user flow rates in non-volatile FRAM 3 preset in Flash
Battery Life: 40,000 drive/vent cycles @ 25ºC from 4 AA alkaline batteries (100 hours based on 10 second drive/vent cycles)
Maximum Output Pressure: 125 psi (861 KPa) 250 psi (1724 KPa)
Maximum Input Pressure: 150 psi (1034 KPa) 300 psi (2068 KPa)