Cross Hatch Cutter

Cross Hatch Cutter

AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6...

  • Robust design
  • Large, non slip grip
  • Ideal for thin, thick or hard coatings

View Quote

Can we help you?

The Elcometer 107 Cross Hatch Cutter provides an instant assessment of the quality of the bond to the substrate.

Due to its rugged construction this gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.
 

  • Robust design
  • Large, non slip grip
  • Ideal for thin, thick or hard coatings
  • A quick change, four sided cutter allows adhesion testing on a wide range of coating thicknesses (1mm, 1.5mm, 2mm and 3mm)


The Elcometer 107 Cross Hatch Cutter is available as a Basic or Full Kit.

 Standards:

AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038  


Part NumberDescriptionMethods
ISOASTMASCertificate
T99913700-16 x 1mm Four sided cutter blade  
T99913700-211 x 1mm Four sided cutter blade  
T99913700-311 x 1.5mm Four sided cutter blade  
T99913700-46 x 2mm Four sided cutter blade 
T99913700-56 x 3mm Four sided cutter blade  
K0001539M001Adhesive Tape (1 roll) ASTM D 3359   
K0001539M002Adhesive Tape (1 roll) ISO 2409   
T9998894-Adhesive Tape (2 rolls) ASTM D 3359   
T9999358-Adhesive Tape (2 rolls) ISO 2409   
○ Optional Calibration Certificate available.

 

Elcometer 1542 Cross Hatch Adhesion Tester

This is a simple but effective method for determining the coating adhesion on a wide range of substrates. This adhesion tester is ideal for coatings on flat surfaces and is available with one of three different spacings, corresponding to the thickness of layer to be tested.

Each cross hatch gauge can be supplied separately or combined in a kit with a standardised brush and x10 magnifier.
Elcometer 1540 Cross Cut AdhesionTester

A simple instrument for quickly determining the coating adhesion of a large variety of paints up to 50μm (2 mils) thickness.

Made from steel, this cross hatch gauge has 11 tapered teeth with 1mm spacing. Two sets of lines are cut at right angles to obtain a pattern of 100 squares.
Elcometer 121/4 Standars & Top Paint Inspection Gauges

Available in two models, the Elcometer 121 Paint Inspection Gauge is designed to measure the thickness of single or multiple layers of coatings.

Both models are supplied with illuminated integrated graticule microscopes.
Elcometer 141 Paint Inspection Gauge

The Elcometer 141 PIG is a quick, versatile method of examination and destructive measurement of coatings in a portable, easy to use instrument.

Ergonomically designed to give a balanced weight distribution for a consistent cut, it is ideal for tough coatings and enamels.
Elcometer 506 Pull-Off Adhesion Tester

The Elcometer 506 are lightweight, portable and easy-to-use adhesion gauges available in analogue or digital versions and are suitable for measuring the pull-off adhesion of coatings up to 50MPa (7250psi) either on-site, or in the laboratory.




 

Part NumberDescriptionCoating ThicknessCertificate
F10713222-1Elcometer 107 Basic Kit (6 x 1mm)0 - 60μm0 - 2.0mils
F10713348-6Elcometer 107 Full Kit with ISO Tape (6 x 1mm)0 - 60μm-
F10713348-1Elcometer 107 Full Kit with ASTM Tape (6 x 1mm)0 - 50μm0 - 2.0mils
F10713222-2Elcometer 107 Basic Kit (11 x 1mm)0 - 50μm0 - 2.0mils
F10713348-2Elcometer 107 Full Kit with ASTM Tape (11 x 1mm)0 - 50μm0 - 2.0mils
F10713222-3Elcometer 107 Basic Kit (11 x 1.5mm)--
F10713222-4Elcometer 107 Basic Kit (6 x 2mm)0 - 125μm0 - 5.0mils
F10713348-9Elcometer 107 Full Kit with ISO Tape (6 x 2mm)0 - 120μm-
F10713348-4Elcometer 107 Full Kit with ASTM Tape (6 x 2mm)50 - 125μm2.0 - 5.0mils
F10713222-5Elcometer 107 Basic Kit (6 x 3mm)121 - 250μm-
Packing ListBasic Kit: Robust handle, cutter, hexagonal wrench, presentation storage case and instructions (together with Classification of Adhesion Test Results chart).
Full Kit: Robust handle, cutter, hexagonal wrench, instructions (together with Classification of Adhesion Test Results chart),eye glass, brush and adhesive tape (either ASTM or ISO tape),all in a plastic ABS carry case.