The Mid-Range 3D Shaker gives you the same convenient, consistent 3D shaking on your bench top as you get with our 3D Floor Shaker.
- Mechanically shakes glassware for consistent, repeatable results.
- Fits in fume hood to protect personnel from fumes. (Minimum 30"d x 36"l x 36"h for 2-liter sep funnels; 24"d x 72"l x 36"h for sizes up to 1-liter).
- Handles total loads up to 40 lbs without needing to balance load.
- "Lazy Susan" design allows 360° rotating of platform for easy loading and unloading.
- Platform locks in place for added safety.
- Accommodates up to four 2-liter separatory funnels.
- Glas-Col's automatic venting separatory funnels available for added safety.
|Motor Speed||10-170 cycles/min|
|Load Weight Capacity||Maximum of 40 lbs. (18.1 kg)|
|Electrical||Power switch, circuit breaker, and 6-ft., 3-wire cord. Digital speed and countdown interval timers.|
|Electrical Rating||120 or 240Volts available|
|Size||Shaker base dimensions-22"d x 17"w (55.9 x 43.2 cm). Height to platform 14" (35.6 cm). Octagonal platform-19" (48.3 cm) across corners.|
|099A VS20012*||Shaker base only, 120V|
|099A VS20024*||Shaker base only, 240V|
|099A VS22012||Shaker base w/four 2-liter separatory funnel holders, 120V|
|099A VS22024||Shaker base w/four 2-liter separatory funnel holders, 240V|
FUNNEL OR FLASK HOLDERS (Midrange Shaker & Floor Shaker)
Each separatory funnel holder will hold one funnel, and you can use up to four holders at once. Holders are available for 250, 500, 1000, and 2000 ml funnels, and they easily mount to the platform without fasteners. While the rear support of the funnel holder remains stationary, the front part holding the funnel can be released and rotated 360°. This permits the funnel to be filled, inverted for shaking, and then re-inverted for addition and/or extraction, all while the flask remains in the holder. This also helps to eliminate breakage of glassware caused by handling. When using standard funnels with glass, plastic, or PTFE stoppers, gas pressure can be released by inverting the funnel and shaking with the stopcock open. Gas pressure can also be released automatically by using Glas-Col's patented VentSep separatory funnels. The Erlenmeyer and Volumetric flask holder will hold a single flask and is available for 250, 500, and 1000 ml Erlenmeyer flasks.
|Part Number||Description||Height||Width (in)||Depth (in)|
|099A VHO250S||Holder for 250-ml separatory funnel||11.0||7.00||8.25|
|099A VHO500S||Holder for 500-ml separatory funnel||11.0||7.00||8.25|
|099A VH1000S||Holder for 1000-ml separatory funnel||11.0||7.00||8.50|
|099A VH1000T||Holder for 1000-ml separatory funnel (Polypro)||11.0||7.00||8.50|
|099A VH2000S||Holder for 2000-ml separatory funnel||11.0||7.25||9.50|
|099A VH2000T||Holder for 2000-ml separatory funnel (Polypro)||11.0||7.25||9.50|
|099A VH0250E||Holder for 250-ml Erlenmeyer flask||11.0||7.25||9.00|
|099A VH0500E||Holder for 500-ml Erlenmeyer flask||11.0||7.25||9.25|
|099A VH1000E||Holder for 1000-ml Erlenmeyer flask||11.0||7.00||10.0|