• Ensemble pour effectuer test de compression

Ensemble pour effectuer test de compression

sur cylindres de remblai rocheux minier

  • - 95F

This affordable, versatile test system is ideal for general production and quality applications fulfilling all but the most rigorous testing needs. The 95F Series tensile testers combine the full digital controller ComTouch Total Control with the economical 95 series tensile test stand.

This variable speed test stand has up/down/stop motor control, crosshead jog, emergency stop, speed dial, and a high speed return.

All the information regarding your tests is reported on the touch screen display: force, deflection, test stand direction, limit switch warnings, test stand speed, and error messages. Designed to be rugged, sturdy, and easy-to-use, this test stand is built to last. Automation and reporting is achieved through the ComTouch controller included with the system. This touch screen driven unit controls the 95F series test stand for automated testing. This system is ideal to test easily plastic, rubber, fabric, and metal, ceramic, composite...

Just select from our wide line of fixtures for standard tensile testing or install an optional compression cage for testing in compression.

  • Capacity between 10 - 5000 pounds
  • Force units: lb, kg, N, g, oz
  • Force accuracy: +/- 0.5% full scale
  • Automatic recognition of the TSB series load cells
  • Sample rate: 100/ second
  • Display rate: 4/ second
  • High speed return with ability to set pause time for auto return
  • Overload protection
  • Peak hold feature: force & deflection
  • Deflection units: in, mm, cm
  • Deflection accuracy: +/- .008 inch
  • Speed accuracy: 2%
  • Load cell overload protection during test and manual displacement
  • Speed regulation for a constant speed with changing load
  • Intuitive industrial touch screen ComTouch controller
  • Digital speed readout (in/min, mm/min, cm/min)
  • Speed accuracy: +/- 2.0% of reading
  • Data output: analog & serial force
  • Mechanical travel limits
  • Upper & lower magnetic limit switch
  • Power requirement: 110 V, 50-60 Hz (220 V, 50-60 Hz optional)


  • Report printer
  • Compression cage for compression testing
  • Safety guard to protect from breaking sample

The all-in-one intuitive
touch screen ComTouch
controller is an easy
intuitive interface to
setup your tests and to
display the results
(force, travel, speed).


Build your own:
1. Before building your own 95F test system, you need to determinate the following parameters:
  • Minimum and maximum force to measure
  • Range of speed
  • Size of the sample and elongation
2. Then choose from the chart below the frame which is corresponding to your tests.
Available capacities, speeds and dimensions for 95T series
Test stand

Lbs (N)
Test stand
speed range

Inches (cm) per min
Part number
Part number
Part number
600 (2700) 30.0-0.6 (76.2-1.5) 95FS 6M 95FM 6M 95FL 6M
1000 (4500) 20.0-0.4 (50.8-1.0) 95FS 1K 95FM 1K 95FL 1K
2000 (9000) 10.0-0.2 (25.4-0.5) 95FS 2K 95FM 2K 95FL 2K
5000 (22500) 3.0-.06 (7.6-.15) 95FS 5K 95FM 5K 95FL 5K
Working width 8" 8" 8"
Travel w/o Fixtures 20" 30" 40"
External (W x D x H) 12"x11"x62" 12"x11"x82" 12"x11"x94"
3. Add the load cells you need to keep the accuracy required for all the range of tests you have. Load cell should only operate in the mid 80% of the load cell range. i.e., a load cell with a 1000lbs capacity should be used between 100 and 900 lbs.

TSB series S-Block load cell
Available load cells TSB for 95 series
Part number Capacity lb (N) Resolution
lb (N)
accuracy lb (N)
TSB0010 10 (45) 0.01 (0.01) 0.05 (0.25)
TSB0020 20 (90) 0.01 (0.1) 0.1 (0.50)
TSB0050 50 (225) 0.01 (0.1) 0.25 (1)
TSB0100 100 (450) 0.1 (0.1) 0 .5 (2)
TSB0200 200 (900)  0.1 (1) 1 (5)
TSB0500 500 (2250) 0.1 (1) 2.5 (10)
TSB1000 1000 (4500) 1 (1) 5 (20)
TSB2000 2000 (9000) 1 (10) 10 (50)
TSB5000 5000 (22500) 1 (10) 25 (100)
4. And finally choose from our wide range of grips the best for your application.