Materials Testing
 
    Tricot pré-nettoyé pour salle blanche

Tricot pré-nettoyé pour salle blanche

100% polyester


Voir la soumission

Réponse rapide par nos spécialistes

Avantages de faire affaire avec Geneq - en savoir plus


Super Polx 1200 is a knife cut cleanroom laundered wiper recommended for ISO Class 4 and above environments composed of 100% continuous filament polyester knit fabric.

This combination of properties provides Super Polx 1200 with the high level of cleanliness, abrasion resistance and chemical compatibility required for ISO Class 4 and above environments and applications requiring critical control of contaminants combined with superior performance.

 

Key Attributes

  • 100% continuous filament polyester knit
  • Knife cut edge
  • Laundered and packaged in Berkshire’s ISO Class 4 cleanroom

 

Benefits

  • Low particles, fibers, ions and extractables
  • High abrasion resistance
  • Chemically compatible with IPA, Acetone and other solvents
  • High sorbency
  • Low endotoxin levels
  • Soft hand and edge for sensitive surfaces

 

Environmental

  • Complies with RoHS 2002/05 and REACH requirements

 

Applications

  • Designed for use in ISO Class 4 and higher cleanroom environments
  • Designed for a high level of contamination control in critical processing applications
  • Integrated circuit fabrication areas
  • CD and DVD manufacturing operations
  • Breakdown cleans in fab and suite construction
  • Equipment wrap and wipe downs
  • Stencil and other print roll cleaning applications
  • Steam autoclavable for aseptic applications
  • Cleaning of medical device products
  • Applying and removing cleaning and disinfecting solutions

 

Options

  • Pre-Wetted Option
    The value pack option provides the same great performance in a more economical bulk packaging format.
  • Value Pack Option
    The same wiper material can be provided in pre-wetted formats for reduced VOC emissions, increased convenience, increased productivity, improved solvent control and cleaning protocol repeatability and reduced costs.
  • Sterile Validated Option
    For aseptic processing areas, the same wiper material can be provided in a gamma irradiated validated sterile to a 10–6 sterility assurance level. Dry and pre-wetted versions available.

 

ProductNumberSizeShts/pkPks/csStyle
Super Polx® 1200S1200.0404.104x4” (10x10cm)60010Value Pack
Super Polx® 1200S1200.0606.96x6” (15x15cm)3009Value Pack
Super Polx® 1200S1200.0909.89x9” (23x23cm)1508Stacked
Super Polx® 1200S1200.0909B.89x9” (23x23cm)1508Value Pack
Super Polx® 1200S1200.1212.1412x12” (30x30cm)7514Stacked
Super Polx® 1200S1200.1212B.1412x12” (30x30cm)7514Value Pack
AttributeValueUnitsTestMethod
BasisWeight151g/m2TAPPIT-410
Caliper521µmTAPPIT-411
Fibers≥100µm0.35fibers/cm2IEST-RP.CC004.3,Sec6.1.3/Sec6.2.2
Particles≥0.5µm0.22x103/cm2IEST-RP.CC004.3,Sec6.1.3/Sec6.2.1
SorbencyCapacity509mL/m²IEST-RP.CC004.3, Sec 8.1 modified / Sec 8.2 modified
Efficiency3.4mL/g
Rate1 seconds
Non-VolatileResidueDIWater0.0045g/m2IEST-RP.CC004.3, Sec 7.1.2
IPA0.0092g/m2
IonsNa+0.17ppmIEST-RP.CC004.3, Sec 7.2.2
K+0.010ppm
Ca++0.053ppm
Mg++0.011ppm
Cl-0.39ppm

Notes:

  • Technical data represented in this table are typical values at the time of publication. These should not be used as product specifications.
  • Due to differences in test methods applied and equipment utilized by different wiper manufacturers, valid product comparisons may only be obtained through side-by-side testing in the same test facility, under similar conditions
  • Third party testing can be performed upon request