Four industriel class 100 - 500°F

500°F

Grieve - CLX-500

Ces fours chauffés électriquement existent en cinq tailles et sont dotés de caractéristiques permettant d'assurer une atmosphère de classe 100 à faible taux de particules à l'intérieur.

QtéVoir la soumission

Réponse rapide par nos spécialistes

Avantages de faire affaire avec Geneq - en savoir plus

Description

Description
Ces fours chauffés électriquement existent en cinq tailles et sont dotés de caractéristiques permettant d'obtenir une atmosphère intérieure de classe 100 à faible taux de particules. Des températures de fonctionnement allant jusqu'à 500°F avec des volumes d'espace de travail allant de 5 à 38,3 pieds cubes. La construction extérieure minimise la production de particules. Ces unités robustes conviennent également aux applications pharmaceutiques ou industrielles.

Key Features
PANNEAU DE CONTRÔLE LISTÉ UL Les fours à armoire de classe 100 standard de Grieve répondent aux exigences de la norme 86 de la National Fire Protection Association, des assureurs de risques industriels, de Factory Mutual et des normes OSHA. Pour certaines applications, telles que celles impliquant des solvants inflammables ou des emplacements dangereux, les organismes susmentionnés exigent des dispositifs de sécurité supplémentaires. Contrôles Régulateur de température numérique, à microprocesseur, à thermocouple, avec indication de la température. Relais de l'élément chauffant à semi-conducteurs Boutons-poussoirs de commande du moteur et interrupteur marche-arrêt du chauffage Voyants lumineux LED Safety Equipment Adjustable, thermocouple actuated, manual reset excess temperature interlock Separate heating element control contactors Recirculating blower air flow safety switch Class 100 Construction Recirculation HEPA filter, stainless steel, high temperature, 99.97% efficient on 0.3 micron particles Direct driven stainless steel recirculating blower Silicone rubber blower shaft seal Stainless steel interior — type 304, 2B finish Continuously back-welded seams on oven interior Easy to remove interior duct work for cleaning Incoloy sheathed tubular heating elements Test port upstream of HEPA filter Positive latching door hardware Silicone rubber door seal Sealed penetrations for heaters and thermocouples Adjustable fresh air inlet — optional HEPA filter with — prefilter available Adjustable exhaust outlet — optional HEPA filter available Two (2) stainless steel shelves Channel shelf supports prevent shelves tipping Brushed stainless steel control panel face and door cover Aluminized steel exterior with white epoxy paint — optional brushed stainless steel exterior available 1 year limited warranty Every oven fully assembled and individually factory tested

Standard Equipment

All Models
- 208 volts, 3-phase, 60 Hz
- 230 volts, 3-phase, 60 Hz
- 460 volts, 3-phase, 60 Hz
- Other electrical characteristics available

These Class 100 ovens come in five sizes:

CLA-500– 5.0 cubic feet, holds 4 shelves
CLB-500– 13.5 cubic feet, holds 8 shelves
CLC-500– 20.7 cubic feet, holds 8 shelves
CLD-500– 29.3 cubic feet, holds 12 shelves
CLE-500– 38.3 cubic feet, holds 16 shelves

They feature full horizontal air flow and adjustable opposed louvers on full coverage supply and return duct work.

Stainless steel (type 304, 2B finish) interior with continuously back-welded seams and easily removable interior duct work for cleaning. Recirculated air flow is continuously passed through a high temperature HEPA filter to remove particles. High temperature HEPA filter has stainless steel housing and is 99.97% efficient on 0.3 micron particles.

Each features completely wired, side access UL listed control panel enclosing terminals for incoming power, temperature controllers, push buttons and pilot lights. Motor starter and solid state heating element relay electrically interlocked to shut off heaters if power to blower is interrupted and to permit operation of blower without heat for cooling. Incoloy sheathed tubular heating elements. Exhaust outlet 4" diameter.

Mechanical enclosure covers recirculating blower motor, heating element terminal box, air flow safety switch and other components to provide continuous exterior surface for easy cleaning.

Outer door cover and control panel face constructed from #4 brushed finish, type 304 stainless steel. Aluminized steel exterior finished with white epoxy enamel paint.

Two (2) reinforced 100 lbs uniformly distributed load capacity stainless steel shelves; shelf support channels on 3" centers.

Specifications
CAUTION: Ovens processing combustible material are required by national fire protection association standard 86 to have a fire supression system. If flammable solvents or vapors are present in an oven, Osha requires conformance with NFPA 86 which defines ovens for these applications as class a ovens. A powered forced exhauster and other non-standard safety equipment must be added.
Model	Work Space		Outside‡ Dimensions (WxDxH)	Max Temp	Blower
Model	Dimensions (W x D x H)	Volume Cu. Ft.	Outside‡ Dimensions (WxDxH)	Max Temp	CFM	HP
CLA-500	24" x 24" x 15"	5	66" x 40" x 52"	500°F	250	1/2
CLB-500	24" x 36" x 27"	13.5	66" x 52" x 64"	500°F	600	3/4
CLC-500	36" x 36" x 27"	20.3	80" x 52" x 64"	500°F	750	1
CLD-500	36" x 36" x 39"	29.3	80" x 52" x 76"	500°F	1000	1 1/2
CLE-500	36" x 36" x 51"	38.3	80" x 52" x 88"	500°F	1500	2

Specifications
Model	Recirculation HEPA Filter* (WxDxH)	Insu- lation	Doors	KW	Operating Characteristics†			Approx Shipping Weight
Model	Recirculation HEPA Filter* (WxDxH)	Insu- lation	Doors	KW	Control Accuracy	Oven Uniformity	Rise Time	Approx Shipping Weight
CLA-500	12" x 6" x 12"	6"	Single	8	±0.3%	±4°F	30 min	935 lbs
CLB-500	24" x 6" x 24"	6"	Single	10	±0.3%	±4°F	33 min	1340 lbs
CLC-500	30" x 6" x 24"	6"	Single	15	±0.3%	±4°F	29 min	1645 lbs
CLD-500	30" x 6" x 24"	6"	Single	20	±0.3%	±4°F	26 min	1960 lbs
CLE-500	30" x 6" x 24"	6"	Single	30	±0.3%	±4°F	21 min	2285 lbs

Additional Equipment Available
Additional Shelves, 200 lbs distributed load per shelf, 800 lbs maximum oven load, specify oven model when ordering. Programmable Temperature Controller, microprocessor based, digital indicating, thermocouple actuated, in lieu of standard controller Option PTC3 Recording Thermometer, thermocouple actuated, 24-hour, 10" diameter circular chart used in conjunction with standard controller Option RT Digital Timing Temperature Controller, microprocessor based, digital indicating, incorperates 99 hour 59 minute timer. Starts timing when temperature reaches set point and shuts down oven at end of set time Option DTS3 Digital Shut Down Timer, with continuous "hold" feature Option SDT Digital Batch Timer, for uniformly timing batch operations. Continuous alarm with door interlock; alarms at end of preset period until door is opened or timer reset Option BT Automatic Door Switch, turns off blower and heat when door is opened. Restores blower and heat when door is closed Option ADS Stainless Steel Exterior, type 304 with #4 brushed finish, in lieu of white epoxy painted aluminized steel Option SSE Automatic Door Lock, solenoid operated, interlocked with oven temperature, optional programmable temperature controller or optional digital timing system Option ADL Pass Through Construction, includes additional door on rear of oven and stainless steel flange to seal oven in factory wall Option PTC Polished Front Welded Interior Seams, including 1/2" radius inside corners, in lieu of back-welded seams Option PS HEPA Fresh Air Filter, 12" x 12" x 6", 99.97% efficient at 0.3 micron particle size, with 2" thick prefilter. Installed in stainless steel housing over the fresh air inlet on the right side of the oven inside the mechanical enclosure Option HFA HEPA Exhaust Filter, 12" x 12" x 6", stainless steel high temperature, 99.97% efficient at 0.3 micron particle size. Installed in stainless steel housing over the exhaust outlet on the top of the oven. Adds 15" to overall oven height Option HEF Pressure Gauge, 0-2" water column static pressure gauge, installed across either recirculation filter, fresh air filter or exhaust filter, to measure pressure drop across filter. For use in determining when filters require replacement Option PG Pressurizing Blower, installed in conjunction with HEPA fresh air filter to maintain positive pressure within the oven, 50 CFM capacity Option PB