• Presse des montage

Presse des montage


Metallographic compression mounting presses apply both heat and temperature to form phenolics epoxies or acrylic mounts.

Castable metallographic mounting can also be accomplished with castable polyesters, acrylics or epoxy resins.



TERAPRESS TP-7001B Pneumatic Automatic Mounting Press (BEST VALUE)

The TERAPRESS TP-7001B automated air pressure mounting press (Part No. TP-7001B) has a solid, easy-to-use, robust design. With a 360° heating element intimately connected to the mold, heating is very efficient. In addition to being efficient, the TERAPRESS TP-7001B offers users more control for both the heating and cooling cycle as compared to most competitive compression mounting presses. By using air pressure to maintain a constant force on the specimen, the requirement to continually monitor and increase the force as the resin begins to melt is eliminated.



TERAPRESS TP-7200 Hydraulic Mounting Press (OPTIMUM PERFORMANCE)

The TERAPRESS TP-7200 programmable electro-hydraulic fixed mold automated mounting press (Part No. TP-7200) has a solid, easy to use, robust design. With electro-hydraulic force and heating up to 200°C, molding is very efficient. 



TERAPRESS TP-7500 Hydraulic Interchangeable Mold Mounting Press

The TERAPRESS TP-7500 programmable electro-hydraulic automated mounting press (Part No. TP-7500) has a solid, easy to use, robust design. With electro-hydraulic force and heating up to 200°C, molding is very efficient. 



TERAPRESS TP-7700 Dual Cylinder Hydraulic Mounting Press 

The TERAPRESS TP-7700 is a programmable, dual cylinder, electro-hydraulic automated mounting press (Part No. TP-7700) with a solid, easy to use, robust design. With electro-hydraulic force and heating up to 200°C, molding is very efficient. 

Feature TP-7001B TP-7200 TP-7500 TP-7700
Mount size 1 to 2-inch (25-50 mm) 1.25 to 2-inch (32-50 mm)
Force Pneumatic Electro-hydraulic
Mold Cylinders Single Single (set at factory) Single  Dual
Incoming pressure range Max. 95 psi n/a n/a n/a
Heater Specification 800 Watts 1000 Watts (110V 15 amp)
2000 Watts (110V 20 amp)
2000 Watts (220V 10 amp)
1400 Watts (110V 15 amp)
1400 Watts (22V 7.5 amp) 
Thermostat range Max 575°F (300°C) <392°F (200°C)
Cooling System Water
Cooling control Manual, temperature, time
Cooling system Water
Electrical Specifications 110V or 220V 
50/60 Hz
Dimensions
(W x D x H)
13.25 x 16.5 x 19.5-inch 
(340 x 420 x 495 mm)
14 x 19 x 20-inch
(350 x 483 x 508mm) 
17 x 19 x 20-inch
(431 x 483 x 508mm) 
21 x 18 x 16-inch
(540x 440 x 410 mm) 
Weight 80 lbs (35 kg) 64 lbs (29 kg)  108 lbs (49 kg)  110 lbs (50 kg)
Recirculating Tank (16 gal) with pump (optional) TP-TANK