PORTABLE OZONE MONITORS
- Aeroqual - Series 200/300/500
Fast response from our specialists
Why buy from Geneq? - find out more
Can we help you?
Model : Series 500
Model : Series 200
Model : Series 300
The Series 200 portable Ozone monitor is a cost-effective monitor compatible with 4 ranges of ozone sensor as well as a temperature and humidity sensor, if required
It is an entry level device designed for spot checking ozone concentrations in a variety of applications. The display can be configured to show the real-time ozone concentration or to display the minimum, maximum and average readings. Ozone concentrations can be displayed in either ppm or mg/m3. The meter is also supplied with a long life lithium battery which has over 8 hours of battery life and a recharge time of 2 hours.
The Series 200 can be fitted with any of the sensor heads listed under the Sensors tab. Because the calibration data is stored in the sensor head, the process of swapping sensor heads is extremely quick and can be done by anyone anywhere. It also makes recalibration and servicing easy – simply return the sensor head to the factory or purchase a new one. The Ozone meter also has an inbuilt option to zero calibrate the installed sensor head to maintain data accuracy between recalibration intervals.
Benefits
- Very easy to use
- Fits comfortably in the hand
- One meter compatible with 4 different ranges of ozone sensor
- Changing sensors takes seconds and can be done anywhere
- Remote sensor capability
- To recalibrate simply send the sensor back to the factory
- Long life lithium battery technology
- Large display gives min., max. and average readings
APPLICATIONS
- Verification of fixed ozone monitor measurements
- Spot checking ozone concentrations
- Health and safety monitoring
- Indoor air quality
Whats included
- Monitor base
- LCD digital display
- Lithium battery and charger
- Configurable Min, Max, Average readings
- Zero calibration
- Temperature/relative humidity sensor (Optional)
The Series 300 Portable Ozone Monitor is a versatile monitor with the ability to accurately measure 4 different ranges of ozone sensor as well as temperature and relative humidity, if required.
It is designed for ozone monitoring and control in a variety of applications. Ozone concentrations can be displayed in either ppm or mg/m3 on the large LCD display. There are also user defined high and low alarm set points which will trigger an audible alarm when the ozone concentration exceeds the set point.
A key feature of the Series 300 Portable Ozone Monitor is the ability to operate in control mode. Upper and lower control limits can be easily set directly on the display. Using the 0-5V output the Series 300 can be used to switch on or off an externally connected device, such as an ozone generator, or system in the presence of a predetermined level of gas. By selecting the optional wall-mount bracket and plugging in mains power the Series 300 is effectively able to act as a fixed monitor as well as a handheld portable device.
For those wanting to recalibrate in the field the Series 300 allows adjustment of zero and span. Together with the R42 Calibration Accessory and an ozone generator this function allows the sensor head to be fully recalibrated without having to return it to the factory. Alternatively the sensor head can be returned to Aeroqual for a factory calibration which includes a renewed calibration certificate.
Benefits
- Very easy to use
- Fits comfortably in the hand
- One monitor to measure 4 ranges of ozone sensor
- Changing sensors takes seconds and can be done anywhere
- Recalibrate sensor in the field or by returning to the factory
- Lithium battery allows a full 8 hours in the field
- Large display gives min., max. and average readings
- Audible alarm to notify ozone exceedences
- Analogue output to control external devices e.g. ozone generator
Applications
- Ozone process control
- Personal exposure monitoring
- Source and leak detection
- Health and safety monitoring
What's included
- Monitor base
- LCD digital display
- Lithium battery and charger
- Zero and span adjustment
- Low and high alarm
- 0-5V output
The Series 500 portable ozone gas monitor enables accurate real-time measurement of ozone in air
Data is stored on board the Series 500 with a maximum 8,188 records available. To download the data a USB cable is supplied for connection to PC. Free PC software provided with the Series 500 takes the data and presents it in a chart or table view. Data can be downloaded and viewed in Excel.
The monitor can also operate in control mode. Upper and lower control limits can be easily set directly on the display. Using the 0-5V output the Series 500 analyzer can be used to switch on or off an externally connected device such as an ozone generator or system in the presence of a predetermined level of gas. By selecting the optional wall-mount bracket and plugging in mains power the Series 500 is effectively able to act as a fixed monitor as well as a handheld portable device.
Other features on the Series 500 include monitor ID and location ID. Monitor ID identifies the monitor uniquely and ensures that all data from it are tied to that monitor. Location ID can be used to tag measurements to a specific location which is helpful when sampling at a number of sites over the course of a day or week. High and low alarms can also be configured to alert when ozone concentrations have reach a user defined set point.
For those wanting to recalibrate on site the Series 500 allows adjustment of zero and span. Together with the R42 Calibration Accessory and calibration gas this function allows the sensor head to be fully recalibrated without having to return it to the factory. Alternatively the sensor head can be returned to Aeroqual for a factory calibration which includes a renewed calibration certificate.
Benefits
- Fits comfortably in the hand
- One monitor compatible with four different types of ozone sensor
- Data logged directly onto monitor base
- Audible alarm functionality
- Changing sensors takes seconds and can be done anywhere
- Remote sensor capability
- Long life lithium battery technology
- Zero and span calibrate in the field
- Free PC software (Windows 7, 8, XP compatible)
- Connect direct to PC via USB
Applications
- Source and leak detection
- Process control
- Health and safety monitoring
- Indoor air quality
What's included
- Monitor base
- LCD digital display
- Lithium battery and charger
- In-built datalogger
- 0-5V output
- Zero and span adjustment
- Low and high alarm
- Monitor to USB cable
- PC software
| Sensor Code | OZS / OZS2 |
| Range | 0-0.05ppm |
| Sensor Type | GSS |
| Minimum Detection Limit | 0.001ppm |
| Accuracy of Factory Calibration | <±0.002 ppm |
| Resolution | 0.001ppm |
| Response Time | 240 Seconds |
| Temp | 0 to 40°C |
| Relative Humidity | 10 to 90% |
| Sensor Code | OZU / OZU2 / OZU4 |
| Range | 0-0.15ppm |
| Sensor Type | GSS |
| Minimum Detection Limit | 0.001ppm |
| Accuracy of Factory Calibration | <±0.005 ppm |
| Resolution | 0.001ppm |
| Response Time | 60 Seconds |
| Temp | 0 to 40°C |
| Relative Humidity | 10 to 90% |
| Sensor Code | OZL / OZL2 / OZL4 |
| Range | 0-0.5ppm |
| Sensor Type | GSS |
| Minimum Detection Limit | 0.001ppm |
| Accuracy of Factory Calibration | <±0.008 ppm 0-0.1 ppm <±10% 0.1-0.5 ppm |
| Resolution | 0.001ppm |
| Response Time | 60 Seconds |
| Temp | 0 to 40°C |
| Relative Humidity | 10 to 90% |
| Sensor Code | EOZ / EOZ2 |
| Range | 0-10ppm |
| Sensor Type | GSE |
| Minimum Detection Limit | 0.01ppm |
| Accuracy of Factory Calibration | <±0.01 ppm + 7.5% |
| Resolution | 0.01ppm |
| Response Time | 5 Seconds |
| Temp | 0 to 40°C |
| Relative Humidity | 15 to 90% |
Vacuum Filtration System for Determination of Suspended Solids in Water
Geneq - VFSF03001, VFGF03001, VFSF06001, VFGF06001
Upon Request
Laboratory Research Grade Two Channel Benchtop pH/mV/ISE Meter
Hanna instruments - HI5222-01
Upon Request
