Drinking Water Testing

• Conductivity Range: 0.001 µS/cm to 3000 mS/cm
• TDS Range: 0.001 to 200.0 ppm
• Salinity Range: 0.06 to 80.00 psu, 0.05 to 42.00 ppt
  

Fresh water and saltwater applications, aquaculture, aquariums, environmental.

0.63” diameter

The AS950 Portable Sampler makes programming, data transfer and operation more intuitive and virtually error-free.

• Budget-friendly meter for simplified dissolved oxygen testing
• Large 5” backlit display makes viewing measurements easy
• Small meter footprint saves valuable lab bench space
• Date and time stamped logs support GLP compliance

• Budget-friendly pH meter for simplified pH and ORP testing
• Large 5” backlit display makes viewing measurements easy
• Small meter footprint savesvaluable bench space in your lab
• Date and time stamped logs support GLP compliance

• Electrochemical analysis for field and lab environments
  

• Electrochemical analysis for field and lab environments
  

• Electrochemical analysis for field and lab environments
  

• For the measurement of cyanuric acid in water.
  

• Makes measuring the concentration of dissolved oxygen hassle-free
  

• Sensitive and rapid test of pathogens and toxic chemicals in drinking water or wastewater.
• Test results highly correlated with other widely accepted toxicity test methods
• Excellent correlation with HPC test methods

• Long lasting
• Corrosion resistant open top plastic tanks
• Mixing tanks provide maximum options for batch mixing, storage, dispensing & material handling

•  VFA and VFB models are available with either brass or stainless steel inlet and outlet 
• All VFA and VFB models are supplied with a standard brass metering valve, stainless steel valves are available upon request
• 100 PSI maximum pressure rating
• VFA and VFB models have a maximum temperature rating of 150 °F
  

• Servo motor drive, powerful and maintenance-free.
• 3 digital LED display motor speed, rotary encoded switch control.
• Suitable for industrial sites, transfer liquid with large flow and high precision.

• Special for university laboratory and research institute.
• Ion chromatography and titrator.
• Pilot scale and industry production.

• With ABS engineering plastic housing, streamlined body design.
• Servo motor control, more strong and precise .
• Large flow rate range with UC25 pump head.
  
  
  

• CAL Check™ Validation and Calibration
• Built-in Timer
• Automatic Shut Off

• For precise use of wet chemistry methods ever produced
  

• It measures 37 key water quality parameters 
  

• Delivers the best low level precision and sensitivity while minimizing variability from test to test.
  

• Designed specifically for measurement of drinking water.
  

• pH, ion concentration, mV, relative mV or ORP with temperature
• Perform up to a five point pH or ISE calibration
  

• pH, mV, relative mV or ORP with temperature 
• DO in % saturation or mg/L with temperature 
  

• pH, mV, ORP, temperature
• Conductivity, total dissolved solids (TDS),salinity, resistivity 
• Perform up to a five point pH calibration
  

• Dual channel: view two measurements at the same time
• pH, ISE, mV, ORP and Temperature 
  
• Perform up to a 6 point ion concentration or pH calibration
  

• Measure dissolved oxygen in percent saturation or mg/L with temperature
• RDO optical or polarographic DO probe for ultimate flexibility in sensors
  

• Measure dissolved oxygen in percent saturation or mg/L with temperature
• RDO optical or polarographic DO probe for ultimate flexibility in sensors
• Data log collects and date/time stamps up to 1000 measurement sets

• DO reading in mg/L or % saturation and temperature
• Automatic temperature compensation
• Manual salinity input and barometric pressure compensation
  

• Designed to deliver accurate results
  

• Conductivity, total dissolved solids, salinity, resistivity and temperature 
  
• Perform up to a five point conductivity calibration
• Data log collects and date/time stamps up to 1000 measurement sets

• pH Range: -2.000 to +20.000, RH Range: 5 to 85%, non-condensing
• ORP, mV and Relative mV Range: ±2000.0mV
• Temperature Range: 22.0° to 221.0° F, -5.0° to 105.0° C

• It offers direct reading of Fluoride down to 0.1 ppm with Automatic Temperature Compensation (ATC).
  

• pH Range : 0 to 14
• Connections: BNC Waterproof
  

• pH Range : 0 to 14
• Material : Rugged epoxy body, filled with low maintenance gel
• Connector Types : BNC Waterproof, 8-pin MiniDIN