Portable Low Range EC/TDS Meter
- Hanna instruments - HI99300
- For use in applications as diverse as wastewater treatment, reverse osmosis, and HVAC. It measures low range conductivity in µS/cm and TDS in ppm.
The HI99300 is a rugged, portable EC/TDS and temperature meter housed in a case rated for IP67 conditions.
It is supplied with a two-ring conductivity probe to allow for low range EC measurements from 0 to 3999 µS/cm and TDS measurements from 0 to 2000 ppm.
All readings are adjusted with Automatic Temperature Compensation (ATC) and users are able to adjust the temperature correction coefficient and TDS factor for accurately compensated measurements.
Features
Two-ring Probe - The HI763063 is a two-pole probe that comes with the HI99300, offering an accurate solution for low-range EC and TDS readings. The probe features a built-in temperature probe to allow for temperature compensated readings.
Two Measurement Modes - HI99300 offers two measurement modes: EC and TDS. Users can easily switch between measurement modes with a simple press of the MODE button. EC measurements range from 0 to 3999 µS/cm; TDS measurements range from 0 to 2000 ppm.
Adjustable TDS Factor - The TDS value in aqueous solutions is directly proportional to conductivity. The ratio between the two parameters depends on the solution being measured. The HI99300 has an adjustable TDS factor from 0.45 to 1.00 with 0.01 intervals, allowing users to choose the conversion factor that is the most appropriate for their particular solution.
Automatic Temperature Compensation - Since the temperature has such a dramatic effect on conductivity and TDS readings, having a meter that offers temperature compensated readings is invaluable. The probe of the HI99300 features a built-in temperature sensor that automatically accounts for the effects of temperature in the range of 0 to 60°C (32 to 140°F).
Adjustable Temperature Compensation Coefficient - The temperature compensation coefficient, also known as β, is adjustable from 0.0 to 2.4%/°C with 0.1% intervals; this factor corrects the reading a set percentage % for each degree Celsius change in the sample.
Automatic Calibration - The HI99300 can be automatically calibrated at one point in a standard EC or TDS solution. A 1413 µS/cm standard is used for EC calibration, which will automatically calibrate TDS readings. However, if the meter is in TDS mode and set to either 0.5 or 0.7 conversion factor, a direct calibration in 1382 ppm or 1500 ppm (using 0.5 or 0.7 conversion factor, respectively) TDS calibration solution can be used.
Battery Error Prevention System (BEPS) - The Battery Error Prevention System detects when the batteries become too weak to ensure reliable measurements.
Instability Indicator - The HI99300 displays a clock tag that will disappear when a reading has achieved stability.
EC Range | 0 to 3999 μS/cm |
---|---|
EC Resolution | 1 μS/cm |
EC Accuracy | ±2% FS |
EC Calibration | automatic, one point at 1413 μS/cm |
TDS Range | 0 to 2000 ppm (mg/L) |
TDS Resolution | 1 ppm (mg/L) |
TDS Accuracy | ±2% F.S. |
TDS Calibration | automatic, one point at 1382 ppm (CONV 0.5) or 1500 ppm (CONV 0.7) |
EC/TDS Temperature Compensation | automatic, 0 to 60°C (32 to 140°F) with β adjustable from 0.0 to 2.4%/°C with 0.1% step |
Temperature Correction Coefficient | automatic, with b selectable from 0.0 to 2.4 %/ °C with 0.1 increments |
EC to TDS Conversion Factor | selectable from 0.45 to 1.00 (CONV) |
Temperature Range | ‐5.0 to 105.0 °C / 23.0 to 221.0 °F |
Temperature Resolution | 0.1°C / 0.1°F |
Temperature Accuracy | ±0.5°C / ±1°F |
EC/TDS Probe | HI763063 with built-in temperature sensor, quick connect DIN connector and 1 m cable (included) |
Automatic Shut-Off | user selectable: after 8 min, 60 min or disabled |
Battery Type/Life | 1.5V AAA (3) / approximately 500 hours of continuous use |
IP Protection | IP67 |
Environment | 0 to 50°C (32 to 122°F); RH max 100% |
Dimensions | 154 x 63 x 30 mm (6.1 x 2.5 x 1.2”) |
Weight | 196 g (6.91 oz.) |
Ordering Information | HI99300 is supplied with HI763063 EC/TDS probe, HI70031 1413 μS/cm calibration solution sachet (1),HI70032 1382 ppm calibration solution sachet (1),100 mL beaker, batteries, calibration certificates for both meter and probe, instruction manual, and rugged thermoformed carrying case. |
Can we help you?
min 10 ch