Smart telemetry device

Smart telemetry device designed to simplify setup, lengthen deployment and optimise data management

Aquatel is a carbon fibre telemetry device with a long battery life and modem communications. It features a GPS receiver and a barometric pressure sensor for location and compensation. You can set up the Aquatel remotely using sms commands and request instant readings.

• Auto Detect Aquaprobe type and sensor configuration - simply plug in your probe and Aquatel will know the probe type and the fitted optional sensors meaning no complicated customer set up is required, its just plug and play
• Remote Configuration - every setting can be checked or updated remotely via sms. Send Re, short for readings, to receive a reply showing all of the current sensor readings
• Built in baro logger for compensations on % saturation of DO and for all level measurements - all compensations are automatic
• Choose either lithium or alkaline batteries - 24 month battery life depending on set up
• Built in GPS receiver to geotag all recorded data and to highlight its position displayed on a map in Inoview

Simple Deployment

• When Aquatel is switched on after a quick initialisation it will begin to connect to the network. As this happens an LED on the top of the device will give an indication of the network signal strength. For example green is a strong signal.
• Once its connected you send Aquatel the sms command to start the GPS detection, you will then receive a reply confirming its GPS location. You have now established that the Aquatel is connected to the mobile network, you know the signal strength and its location.
• The final test is to send the device ’Re’ for readings to check that the connected probe is reading correctly. Once these few simple steps are complete your deployment is ready and you can leave the site. Any further settings changes can be adjusted remotely.