Environment
    Cutting MillsCutting MillsCutting Mills

Cutting Mills

  • Retsch - SM 100 - SM 200 - SM 300
  • Powerful size reduction – also of heterogeneous material mixes
  • Selection of models to suit different requirements
  • Final fineness: d90 < 250 µm

View Quote

Fast response from our specialists

Why buy from Geneq? - find out more


The Perfect Cutting Mill for Every Requirement

The RETSCH cutting mills provide highly efficient primary size reduction of heterogeneous material mixes but are also suitable for grinding soft, medium-hard, elastic or fibrous samples. With the SM 100, SM 200 and SM 300 RETSCH offers three models for different requirements.

SM 100 – The Budget-Priced Basic Model

The SM 100 model is suitable for the size reduction of soft, medium-hard, elastic or fibrous products which can be comminuted without requiring extremely high forces. The mill is particularly suitable for routine applications. It is easy to operate and can be mounted on a solid table or on the optional base frame.

SM 200 – The Universal Standard Model

Within the RETSCH cutting mill family, the SM 200 is the universal standard model which covers a vast range of applications with its strong 2.2 kW drive and 1,500 rpm rotor speed. It can be operated with the optional cyclonesuction- combination to improve, for example, discharge of low-density materials. The hopper can be folded back and the push-fit rotor and sieve are easily removed for cleaning without tools.

SM 300 – The High Performance Model with RES Technology

The SM 300 model is characterized by a high torque, maximum cutting effect as well as safe and convenient operation. To allow for optimum adaptation to the sample properties with regards to breaking behavior and temperature sensitivity, the SM 300 features a variable speed from 700 min-1 to 3,000 min-1. Thus it is possible to grind a great variety of products with one mill, including tough and thermally sensitive materials. An additional flywheel mass provides exceptional cutting power reserves, thus enabling the SM 300 to grind many materials to analytical fineness in only one working run (RES technology). The grinding chamber features an optimum geometry. The wide opening of the hopper and excellent feeding properties allow for large sample volumes, resp. pieces, thus increasing the throughput. Just like the SM 200, the SM 300 can be equipped with the cyclone-suction-combination which is especially recommended for fibrous, light sample stock.

The RETSCH Cutting Mills SM 200 and SM 300 excel especially in the tough jobs where other cutting mills fail. They offer a high degree of safety and longevity of the grinding tools.

Benefits

  • Powerful size reduction – also of heterogeneous material mixes
  • Selection of models to suit different requirements
  • Optimum cutting effects thanks to double acting cutting bars (SM 200 & SM 300)
  • SM 300 with variable speed from 700 to 3,000 min-1, 3 kW drive with high torque
  • Rotational Energy Storage Technology (RES) provides exceptional cutting power reserves (SM 300)
  • Defined final fineness due to bottom sieves with aperture sizes from 0.25 – 20 mm
  • Low heat build-up
  • Quick and easy cleaning thanks to push-fit rotors, smooth surfaces and foldback hoppers (SM 200 and SM 300)
  • Highest safety standard due to motor brake, central locking device and electronic safety check
  • Wide range of accessories including various hoppers, collecting systems, rotors and sieves

SM 100SM 200SM 300
Applicationsize reduction by cutting
Fields of applicationagriculture, biology, chemicals / plastics, food, engineering / electronics, medicine / pharmaceuticals, environment / recycling
Feed materialsoft, medium-hard, elastic, fibroussoft, medium-hard, tough, elastic, fibrous
Performance data
Feed size*max. 60 x 80 mmmax. 60 x 80 mmmax. 60 x 80 mm
Final fineness*d90 < 250 µmd90 < 250 µmd90 < 250 µm
Rotor speed at 50 Hz1,500 min-11,500 min-1700 – 3,000 min-1
Cutting barsstandarddouble actingdouble acting
Rotors6-disc rotor and parallel section rotor6-disc rotor and parallel section rotor6-disc rotor, parallel section rotor and V rotor
Hoppersfixedfoldbackfoldback
Collecting receptacle
Standard5 l5 l5 l
Options0.25 / 0.5 / 30 l0.25 / 0.5 / 30 l0.25 / 0.5 / 30 l
Cyclone (Option)0.5 / 1 / 2 / 5 l0.5 / 1 / 2 / 5 l
Technical data
Drive3-phase-motor3-phase-motorfrequency-controlled 3-phase-motor
Drive power1,500 W2,200 W3,000 W
with flywheel mass (approx. 28.5 kg)
Motor brake
W x H x D
(with base frame and universal hopper)
582 x 1,675 x 700 mm576 x 1,675 x 760 mm576 x 1,677 x 750 mm
Net weightapprox. 73 kg without base frame, hopper and rotorapprox. 90 kg without hopper and rotorapprox. 160 kg without hopper and rotor