• Analog pressure transducer

Analog pressure transducer

  • Rugged housing and fully potted electronics—not damaged by freezing water
  • Compact size
  • Accuracy of ± 0.25% full span

View Quote

Can we help you?

The Stevens SDX (Submersible Depth Transmitter) is a pressure sensor that delivers accurate results while still remaining very affordable for a wide range of level measurement applications

High impact, corrosion-resistant PVC Type II housing and potted electronics make the SDX extremely durable for most water and hostile fluid environments. The SDX is also an excellent choice for level measurement application that may put more expensive sensors at risk for damage.

The SDX comes equipped with user specified vented cable lengths. The vent provides an atmospheric reference for the sensor, which is necessary for ensuring the highest possible accuracy when making a level measurement.

The SDX features one 4-20 mA analog output signal that corresponds linearly to range. Compatible with existing power and data logging instruments, the SDX can easily be deployed for data collection at remote monitoring sites.

The sensor housing integrates pipe threads for securely mounting the SDX into pipes, tanks, or other applications.

  • Rugged housing and fully potted electronics—not damaged by freezing water
  • Compact size
  • Accuracy of ± 0.25% full span
  • Analog output (4-20 mA)
  • Vented cable, 2 wire, with drain
  • Weighted copper nose cone


The SDX is a “Wet-Wet” device. While it is important to keep the SDX cable’s vent tube unobstructed for barometric pressure compensation, neither the pressure transducer nor internal electronics are damaged by condensation or moisture entering the vent tube. For best results, Stevens recommends the desiccant cartridge with vent tube adapter.

Power requirements

9 - 30 VDC


4-20 mA current signal, linearly corresponding to range

Operating temperature

-40° F to 185° F (-40° C to 85° C)

Compensated temperature

32° F to 122° F (0° C to 50° C)


0-2.5 ft range: 0.2% max.
0-5 ft range: 0.2% max.
0-10 ft range: 0.2% max.
0-35 ft range: 0.3% max. 
0-50 ft range: 0.3% max.
(0.1% typical for all ranges)

Repeatability & hysteresis

Typical: ± 0.2% span

Reverse polarity protection

Built into sensor


0-2.5 ft: 20 psi max.
0-5 ft: 20 psi max.
0-10 ft: 20 psi max.
0-35 ft: 45 psi max.
0-50 ft: 45 psi max.


Qualification tested to 150 g


Red: power
Green: 4-20 mA return
Silver: drain wire

Pipe threading

1/2-14 straight pipe thread (back of sensor housing near cable)
3/8-18 straight pipe thread (under removable copper nose-cone)

Physical size

4.00" L x 0.84" dia. (101.6 mm L x 21.33 mm dia.)


Probe: 2.37 oz (61.19 g)
Cable: 0.43 oz (12.19 g) per foot (.4 g per cm)
(weights are approximate)