• Nouveau
    Analyseur O2/CO2 portatif
DEMFQU907-

Analyseur O2/CO2 portatif

  • Plage de mesure : 0 à 100%
  • Sensibilité à l'oxygène : 0,1% O2
  • Pompe d'échantillon : type de diaphragme miniature

The Q2 is a Portable Oxygen and CO2 analyzer, used for research or package testing.

The Q2 is a portable headspace analyzer for measurement of O2 and CO2 levels in gas flushed MAP packages (such as coffee or meat products).  Alternately, the Q2 can be used for portable O2 and CO2 measurements for research applications (such as cell culture incubators).

It weighs only 2 lbs, and comes with rechargeable batteries, sample probe, charger, and accessories to begin sampling.  There is also an optional hard carry case for easy portability and protection.

Ultra Fast

The Model Q2 incorporates the latest fast response O2 and CO2 sensors, which allows results to be obtained in 15 seconds for rapid spot checks.  The oxygen sensor is also rated for 5 years of life, which is far better than the competition.   Other analyzers utilize cheap oxygen sensors which may last 18-24 months.

Easy Sampling Method 

Our standard sample probe assembly for food package testing connects to the Model Q2 – this sample probe is interchangeable with all of our other analyzers, and is a durable double tubed, single piece.

The probe is tipped with a liquid blocking filter and tri-beveled, non coring needle.    The filter will block liquid and particle intake into the analyzer, and the needle is specially designed to prevent “coring”, or plugging, and is incredibly tough.

User Friendly, Accessible Controls 

On the side of the instrument there are five adjusting potentiometers – you can adjust the oxygen span, pump time, CO2 span, and other parameters on the fly.  There’s no need to reboot and no need to warmup – it’s as easy as it gets.

About the Sensors

The infrared CO2 sensor utilizes NDIR technology for maximum stability, and has a theoretically unlimited lifespan.  Its ultra low power consumption allows for 10-14 hours of runtime for the analyzer before recharging is required.

It has no moving parts, no consumables, and is housed in a compact optical cell. The sensor responds to CO2 only.

The electrochemical O2 sensor life is typically 4-5 years, unlike other analyzers with an electrochemical sensor that last 1-2 years. When required, replacement is easy and inexpensive.

Both sensors are unaffected by high levels of background gases such as nitrogen.

Warranty Statement

The Model Q2 is backed  up with a two year warranty, twice the industry standard.


Oxygen Channel
Oxygen Sensor TypeProprietary Electrochemical
Expected Lifetime4-5 years
Oxygen  Range0 to 100%
Oxygen  Sensitivity0.1% O2
Oxygen  Minimum Detection Limit0.1% O2
Oxygen Calibration ControlsSPAN adjustment, zero adjustment
O2 Calibration FrequencyWeekly; set with room air set to 20.9% O2.
O2 Resolution0.1% O2
Carbon Dioxide Channel
Carbon Dioxide Sensor TypeSolid-state Infrared
Expected LifetimeTheoretically unlimited
Measurement Ranges0-100%
Accuracy (for 0-100% range)± 1% of reading, or ± 0.2% CO2 (whichever is greater)
CO2 Minimum Detection Limit0.1%  (0-100% range)
CO2 Calibration ControlsPotentiometer SPAN adjustment for CO2 and zero adjusment
CO2 Calibration FrequencyEvery 18 months; calibration gas recommended.
General
Sample PumpMiniature diaphragm type with ~5cc/sec flow
Pump Timing2-12 second adjustable pump time, potentiometer on side of analyzer
Sampling PortDouble reinforced sample probe (~12in. length)
Exhaust portVents to air
Power SupplyFour "AA" NiMH rechargeable batteries; auto shut-off after 45 minutes idle. 100-240V (50-60Hz) Charger included, with US or international interchangeable plug adapter (upon request)
Backup PowerFour "AA" alkaline batteries (not included)
Input Voltage100-240V, 50-60Hz
Battery Life10-14 hours before recharging
Size8 x 4 x 1.8 in. (200 x 100 x 40 mm)
Weight1 lb. (450 gms)
StandardsCE, RoHS,