Innovative Peltier cooling technology, eliminates the need for a refrigeration compressor.
These units use over 70% less power than alternative models and reduce room air conditioning loads by 75%. They also include strong shelves, which eliminates sagging. These incubators meet APHA specifications for Biochemical Oxygen Demand (B.O.D.) and include a mechanical convection system to ensure even air distribution, digital temperature set controller, over temperature limit control, door ajar alarm and a digital temperature display.
"The amazing temperature uniformity of the Shellab SRI20P allowed us to replace two compressor based BOD incubators with just this one unit. Previously, we had to use two units for our samples because the temperature uniformity spread was too large between the top and bottom shelves so that we could really only use the middle shelves. We definitely appreciate having more room in our lab. The slide out shelf is extremely convenient and the shelves in general are the sturdiest that I’ve seen in a BOD incubator. The energy savings of the SRI20P is also a very important feature for me. Clean Water Services is a steward for public health, environmental protection and economic vitality. This goes hand-in-hand with the Shellab SRI20P’s energy efficiency and the reduction we will see in our lab’s air conditioning loads."
Jim O’Reilly, BOD Lab Specialist, Clean Water Services
Precise Temperature Control - Superior Uniformity
- Independent Over Temperature Thermostat
- Over Temperature Alarm
- Door Ajar Alarm
- Temperature Uniformity +/- 0.5ºC at 20ºC
|Exterior Dimensions (wxdxh)||Inches||23.5 x 21.0 x 33.7||30.0 x 31.5 x 33.5||30.0 x 31.5 x 69.5|
|cm||59.7 x 53.4 x 85.6||76.2 x 80.1 x 85.1||76.2 x 80.1 x 176.6|
|Chamber Dimensions (wxdxh)||Inches||19.0 x 16.2 x 26.2||25.5 x 24.0 x 18.5||25.5 x 24.0 x 54.5|
|cm||48.3 x 41.1 x 66.5||64.7 x 60.9 x 46.9||64.7 x 60.9 x 138.4|
|Incubator Chamber Capacity||cu ft||3||6.5||19.3|
|Interior Outlet||Number||120V -1 / 230V-2||120V -1 / 230V-2||120V-1 / 230V -2|
|Temperature Range||at 20°C Ambient||15 - 30°C||15 - 40°C||15 - 40°C|
|Number of Shelves||Included||2||2||5|
All specifications are determined by using average values on standard equipment at an ambient temperature of 25°C (77°F) and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time.