Complete packages for 6 or 12 measuring stations
Complete packages for 6 or 12 measuring points for routine measurements:
The BOD measurement with OxiTop® is based on pressure measurement in a closed system: The micro-organisms in the sample consume the oxygen and generate CO2 in the process. This is absorbed with NaOH. This will cause a vacuum pressure, which can be determined as a measured value in mg/l BOD.
The sample volume used regulates how much oxygen is available in order for full BOD to run. With different volumes, measuring ranges up to 4,000 mg/l BOD can be measured.
The OxiTop® heads (green and yellow to differentiate between infeed and output) have an AutoTemp function: If the sample temperature is still too cold, the start of the measurement is delayed automatically until a constant temperature is reached, but at least for 1 hour.
In addition to the automatic saving of 5 measured values (1 value per day), you can also manually read other measured values after these 5 days have elapsed, so that control values or measurements can be tracked over time (long-term).
The OxiTop® IS is ready for use immediately, as we will always supply you with product sets including accessories.
|OxiTop® measuring head|
|Measuring principle||gauge pressure sensor|
|Measuring range||0 ... 40 digits (display units) équivautà 0 ... 40/80/200/400/800/2000/4000 mg / L BOD|
|Display resolution||± 1 digit (± ^ = 3.55 hPa)|
|Print field||500 - 1100 hPa|
|Memory of the measured values||for BOD5: 1 day|
|Room temperature||Storage: -25 ° C ... +65 ° C
Operation: +5 ° C ... +50 ° C
|Dimensions||H: 69 mm, Ø 70 mm|
|OxiTop® IS 6||
Complete package, ready to measure, 6 simultaneous measurements with a stirring system IS 6 for
operation on 230V / 50 / 60Hz and 6 OxiTop® measuring systems, including accessories
|OxiTop® IS 12-6||
Complete package, ready to measure for 6 simultaneous measurements, expandable to 12 simultaneous measurements,
with IS agitation system 12 for operation on 230V / 50 / 60Hz and 6 OxiTop® measuring systems, including accessories
|OxiTop® IS 12||Complete package, ready to measure, 12 simultaneous measurements, with IS agitation system 12 for operation on 230V / 50 / 60Hz and 12 OxiTop® measuring systems, including accessories||
|Note: Options for devices 120 VAC / 60 Hz|
|OxiTop® GN||Measuring head green||208800|
|OxiTop® GB||Measuring head yellow||208810|
|OxiTop®-6||3 x measuring head GN, 3 x measuring head GB||208812|
|OxiTop®-10||5 x measuring head GN, 5 x measuring head GB||208813|
|OxiTop®-2||1 x measuring head GN,1 x measuring head GB||208814|
|OxiTop® SET-6||Set with 6 measuring points, without stirring platform||208817|
|OxiTop® SET-10||Set with 10 measuring point, without stirring platform||208818|
|OxiTop® SET-2||Set with 2 measuring points, without stirring platform||208819|
|ST-OxiTop®||Storage rack for heads||209010|
|PF 600||Replacement bottle, minimum order 3||209100|
|REF 600||Stirrer remover||209130|
|NHP 600||Sodium hydroxide pads||209140|
|NTH 600||Nitrification inhibitor||209331|
|OxiTop® PM||Calibration tablets||209333|
|OxiTop® PT||Leakage test material||209334|