Photomètre à flamme
- Sherwood - 420Cs
- Référence interne au césium ou au lithium sélectionnable par l'opérateur.
- Microprogramme embarqué avec suppression numérique.
- Mesure simultanée de deux des trois éléments disponibles (sodium, potassium et / ou lithium).
The Model 420Cs is the latest addition to our dual channel Flame Photometer range.
- Operator selectable Caesium or Lithium internal reference.
- On board firmware with digital blanking, calibration and sampling routines greatly increase calibration speed and sample throughput.
- Simultaneous measurement of up to two of three available elements (Sodium, Potassium and/or Lithium).
- Linearised Sodium response over the expected clinical Sodium concentration range (following a 1 in 200 dilution).
- Improved precision with the internal reference facility (<0.5%CV for aqueous standard solutions).
- Robust safety features including flame detection and gas safety shut off with low air pressure.
- Two in-built digital displays for calibration and analysis data of each channel, analogue output connectors for use with chart recorders and some on-line analysis systems.
- A “no tools” maintenance approach allowing for easy access to and cleaning of the mixing chamber and burner assembly.
- RS232 for data output to a printer or PC when installed with the Regulated BlueNotes 420 Software package.
Regulated BlueNotes 420 Software
Regulated BlueNotes 420 Software is designed to provide features that enable users to operate in a manner compliant with data handling standards such as 21 CFR Part 11. The software expands functionality of the Model 420Cs Flame Photometer; allowing data collection from all three element detector channels simultaneously in one sample sequence.
There is also the option to configure the software to use Potassium as an internal reference channel in addition to the Caesium (default) or Lithium channels.
Regulated features include:
- A three tier login system with different levels of access. (Operator, Supervisor and Administrator)
- Unique user names and passwords for every user.
- Audit trails record all operations with detailed information concerning the user and the software version, Windows version and PC name to ensure traceability and accountability.
- Robust data file system which is tamper evident and inaccessible to users without elevated Windows privileges.
- Tamper evident data format used for analysis result, system configuration and method files to ensure data integrity.
- Auto generated PDF analysis reports provide a comprehensive summary of all information relevant to an analysis run in one clear and concise document.
|Na Serum||110.0 to 170.0 mmol/l||Na Serum||Na Serum within ± 2 mmol/l|
|Na Urine||0.0 to 199.9 mmol/l||Na Urine||Na Urine within ± 4 mmol/l|
|K Serum||0.00 to 10.00 mmol/l||K Serum||K Serum within ± 0.2 mmol/l|
|K Urine||0.0 to 200.0 mmol/l||K Urine||K Urine within ± 2 mmol/l|
|Li Serum||0.00 to 3.00 mmol/l||Li Serum||Li Serum within ± 0.2 mmol/l|
|Na (140.0 mmol/l) with de-ionised water||< 0.5% CV (w/ Ref Facility)||Na Serum/Urine||1 in 200|
|K (5.00 mmol/l) ionised water||< 0.5% CV (w/ Ref Facility)||K Serum||1 in 200 with de-|
|K (80.0 mmol/l) ionised water||< 0.5% CV (w/ Ref Facility)||K Urine||1 in 200 with de-|
|Li (1.50 mmol/l) ionised water||< 0.5% CV (w/ Ref Facility)||Li Serum||1 in 50 with de-|
The above is correct for use with Propane. Results obtained from 20 replicates of the same sample, aspirating sample for 20 seconds, then water for 10 seconds. To achieve the stated specification the flame must be alight for a minimum of 30 minutes, with diluent (containing Diluent Concentrate) being aspirated.