Environment
 
    Portable water sampler for water quality

Portable water sampler for water quality


View Quote

Fast response from our specialists

Why buy from Geneq? - find out more


Global Water has created a unique water quality sampling system

  • Ideal for wastewater, industrial and environmental sampling
  • Easy to use 4 button interface with user selectable sensor types
  • Rugged construction for harsh environments
  • 2 independent output relays with parallel open collector signal lines
  • Scalable water quality triggers for taking composite samples
  • Sampler Data Recorder is MS Windows compatible

This system includes an easy to use lightweight triggered composite water sampler, a water quality process controller with dual relay outputs, and a data recorder that is MS Windows compatible. This compact system is portable for field installation and fully customizable to meet your needs.

Water Quality Process Controller

The Process Controller’s LCD display shows the type of sensor that is being monitored, the data reading and the engineering units. The display also indicates if either relay has been triggered since last reset, which relay was triggered, and whether the maximum or minimum limit was exceeded. Two separate relays are provided, one triggering the sampler and the other for controlling all types of external devices including alarms, mixers, pumps, control valves, floodgates and telemetry systems. Each relay is independently programmable to trigger on maximum and/or minimum levels in one of three different modes.

Water sampler

Global Water triggered water samplers are enclosed in rugged, rainproof, lockable carrying containers. Inside each standard water sampler container is a 2-gallon polyethylene waste water sample bottle for collecting composite samples, a peristaltic sampling pump, control panel (No programming required) and a rechargeable gel cell battery. Other options include glass sample bottles, refrigerated containers, portable ice containers and more.

Water Quality Sampler Data Recorder

Global Water’s sampler data recorder works with MS Windows software. The data recorder monitors and logs both water quality value and time of the sample for your records. Data downloaded from the recorder can easily be opened in any PC spreadsheet program for analysis and graphic presentation.

Specifications

  • Composite Water Sampler

    Sample Size: 15 composite sample sizes from 50ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head)
    Operating Temperature: 32° to +158°F (0° to +70°C)
    Materials:
    Enclosure: Expanded UV protected PVC
    Bottle: 2.5 gallon Polyethylene
    Pickup Hose: 15' reinforced PVC 1/4" ID polyethylene flexible tubing section with intake strainer
    Pump Tubing: Norprene 1/4" ID, 7/16” OD
    Sample Pump:
    Flow Rate: 1000 ml per minute at a 4 foot head
    Type: Peristaltic
    Maximum Lift: ~20 feet
    Battery: Rechargeable 5 AH Gel Cell
    Battery Life: ~1 hour, continuous pumping under load
    Standby: 3 months while still retaining enough power to run the pump to capacity
     
  • Water Quality Sampler System Controller

    Sensor Display: 5 digit + decimal place, LCD
    Accuracy: 0.1% of full-scale + 0.005mA + Sensor Error
    Analog Sensor Input: 4-20mA, 0-5V, 0-1V Jumper Selectable
    Input Resolution: 0.005mA or 1.2mV
    Sensor Types/Units: Water Level (Feet/Meters),Temperature (ºF/ºC),pH (no units),Dissolved Oxygen (%),Turbidity (NTU/ppm),Conductivity (µS),Wind Speed (MPH/KPH),Wind Direction (º),Soil Moisture (%),Custom Sensor (any of the above, mA, mV or custom programmed units)
    Sensor Data Range: 0.000 to 60,000 (60000 in the display with 4 different decimal point positions)
    Relay Contacts: (All Models)
    Voltage: 30VDC
    Current: 5A/30VDC
    Max Capacity: 150W
    Relay 1, Pulse Output: NPN to Ground, 1.0Kohm pull-up resistor (connected to sampler) (WQS-STD, WQS-LTS, and WQS-LTU only)
    Relay 2, Pulse Output: NPN to Ground, Open-collector (WQS-STD, WQS-LTS, and WQS-LTU only)
    Relay Time Ranges: 1-60,000 seconds (16.7 hours)
    Resolution: 1 second increments
    Sleep Time Range: 1-240 minutes (4 hours)
    Resolution: 1 minute increments
    Analog Output: 4mA minimum, 20mA maximum (Sensor reading)
    Resolution: 0.005mA
    Power:
    WQS-STD, WQS-LTS, and WQS-LTU: independent 12VDC rechargeable battery
    60mA DC normal, 100mA maximum
    120uA during sleep mode
    WQS-INT: uses the sampler's 12VDC rechargeable battery
    60mA DC normal, 100mA maximum
    120uA during sleep mode
     
  • Water Quality Sampler Data Recorder

    Memory: Non-volatile flash memory
    Power:
    WQS-STD, WQS-LTS, and WQS-LTU: independent 12VDC rechargeable battery
    WQS-INT: uses the sampler's 12VDC rechargeable battery
    Standby Current: 70uA Typical
    Logging Current: 5mA Typical + sensor current
    Analog Sensor Inputs: 4-20mA
    Resolution: 12-Bit, 4096 Steps
    Sensor Warm-up Time: Programmable, 0-60 Sec
    WQS-STD and WQS-INT: 6 Input channels + sensor + battery voltage monitor
    WQS-LTS and WQS-LTU: sensor + battery voltage monitor
    Digital Inputs:
    Maximum Input Voltage: 24VDC
    Maximum Frequency: 100Hz
    Minimum Pulse Width: 2mS
    Maximum Count: 65,535 (16-Bit)
    WQS-STD and WQS-INT: Sample Event + 1 input channel
    WQS-LTS and WQS-LTU: 1 input channel connected to sampler
    Sample Now Input: Sample-on-Demand input, software enabled (WQS-STD and WQS-INT only)
    Maximum Input Voltage: 24VDC
    Minimum Pulse Width: 2mS
    Sample Modes:
    Fixed Interval Programmable from 1 Sec. to >1 Year
    High Speed 10 Samples per second
    Logarithmic Sample Rate (Approximation)
    Exception (Log only on deviation from previous reading)
    Storage Capacity:
    WQS-STD and WQS-INT: 40,879 Recordings for all inputs plus time
    WQS-LTS and WQS-LTU: 81,759 Recordings for all inputs plus time stamp
    Data Overwrite: Select memory wrap or unwrap (unwrap will stop logging data once memory is full)
    Communication Ports:
    WQS-STD and WQS-INT: RS-232 DB9 or USB Type B
    WQS-LTS: RS-232 4-pin circular connector
    WQS-LTU: USB Type B
    Selectable Baud Rates: 9600, 19200, 28800, 38400, 57600, 115200
    Clock: Synchronizes to the time and date of user's computer
    Operating Temperature: Industrial, -40 to +185ºF (-40 to +85ºC) (Battery may not apply)
     
  • Data Logger Software

    Compatible with Microsoft's Windows 98, ME, 2000, NT, XP, Vista, and 7
    Windows and Excel are trademarks of the Microsoft Corporation
    Tabular Display/Printout
    Data in standard spreadsheet format (.CSV)
    Programmable alarm start and stop times
    Field calibration software and help files included
    NOTE: 64 bit operating systems are not currently supported.
     
  • Mechanical:

    WQS-STD: (2 enclosures)
    Sampler Enclosure: 22x17x9 inch (56x43x23 cm) (HxWxD)
    Water Quality Logger Enclosure: 14.5x10x6 inch (17x25x15 cm) (HxWxD)
    Sampler Weight: 20 lb (9 kg)
    Water Quality Logger Weight: 13.6 lb (6.2 kg)
    WQS-LTS and WQS-LTU: (2 enclosures)
    Sampler Enclosure: 22x17x9 inch (56x43x23 cm) (HxWxD)
    Water Quality Logger Logger Enclosure: 14.5x10x6 inch (17x25x15 cm) (HxWxD)
    Sampler Weight: 20 lb (9 kg)
    Water Quality Logger Weight: 12.6 lb (5.7 kg)
    WQS-INT:
    Enclosure: 22x17x9 inch (56x43x23 cm) (HxWxD)
    Weight: 21.5 lb (9.75 kg)