• Chambre de croissance diurne

Chambre de croissance diurne

DIN 12880

  • LED Display of Set point and Chamber Temperature
  • High and Low Limit Temperature Protection
  • Day/Night Light and Temperature Control

SHEL LAB Diurnal growth chambers are designed for studies requiring day and nighttime simulation.

This unit features dual-program selector dials, which allows control of two temperature conditions and an ON/OFF illumination cycle relative to the program selected. Each system operates independently allowing for simulation of a diurnal cycle, such as an eight hour day cycle of 30°C with light followed by a sixteen hour night cycle of 18°C without light. Forced air circulation ensures the most reproducible test conditions. The chamber air is gently and continuously circulated at a rate that ensures temperature uniformity of all test samples. The unit is equipped with a hermetically-sealed compressor and an independent over temperature safety controller. In addition, a one amp interior outlet allows use of shakers, stirrers, roller bottles or other apparatus. This chamber is ideal for plant growth studies.

  • LED Display of Set point and Chamber Temperature
  • High and Low Limit Temperature Protection
  • Day/Night Light and Temperature Control
  • Fan Assisted/Forced-Air Circulation
  • Hermetically Sealed Compressor
  • Interior Electrical Outlet

Precise Temperature Control - Superior Uniformity

  • Independant Over Temperature Thermostat
  • Temperature Range 0°C to 45°C at 20°C Ambient
  • Temperature Uniformity +/- 0.5°C at 20°C
Exterior Dimensions (wxdxh) Inches 34.5 x 34.5 x 77.5
cm 87.7 x 87.7 x 196.9
Chamber Dimensions (wxdxh) Inches 27.0 x 23.0 x 56.5
cm 68.5 x 58.4 x 143.5
Incubator Chamber Capacity cu ft 20.3
L 574
Interior Outlet Number 110V
Number of Shelves Included 4
Bottle Capacity Number 317

All specifications are determined by using average values on standard equipment at an ambient temperature of 25°C (77°F) and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications