• Serial Diluter

Serial Diluter

  • IUL - Bio Dilutor

Two models make volumetric dilutions of 1 to 10 ml on microbiological samples. Bio Dilutor can also perform gravimetric dilutions using an external scale. Both models reduce labor, save time and insure sterility and accuracy.


Sterilization - All parts of the Bio Dilutor the liquid circuit are autoclavable. A few seconds to dismantle and assemble this circuit. During these operations, the syringe remains protected in its support.

Zero contamination - The instrument complies with all the requirements for dilutions without cross contamination between samples. The samples are kept in the tip or the little straw and then rinsed and completely expelled with the diluent.

Precision - Bio Dilutor has a stepper motor that allows very precise dilutions.


Volume of the syringe 10, 5, 2.5 or 1 ml.Introduire into the autoclave with the separate piston.
Maximum flow rate of payment 4 ml / s with 10 ml syringe
Passage minimum volume 1/1000 of the nominal volume of the syringe
Single-use tips Used in each program
Air bubble volume Programmable up to 1300 .mu.l
Sample volume Programmable multiple of 1/1000 of the total volume of the syringe
Minimum sample volume 1% of the volume used for the warning message seringue.Un warns if it is less than 5%.
Dilution factor Programmable from 1: 1 to 1: 1000
Reproducibility Better than 1% even with dilutions employing more than a full syringe
Printer connection RS232 Series
Supply 100/240 V, 50 / 60Hz
Power 40W
Dimensions (Width x Depth x Height) 30 x 30 x 20cm
Weight 6 Kg
Only for the Advanced model
Log in balance RS232 programmable.
Gravimetric dilution By the specific weight of solvent
Related programs Up to 9
IUL, SA reserves the right to change specifications without notice