Tramex

New
MOISTURE ENCOUNTER

MOISTURE ENCOUNTER

CMEX5

ASTM F2170

Upon Request

New
FLOORING INSPECTION EZ KIT

FLOORING INSPECTION EZ KIT

FZK

  • Instant concrete moisture content test from 0 - 6.9% with CMEX II to ASTM F2659.
  • Fastest, most reliable, Hygro-i2 ® Relative Humidity probe for testing to ASTM F2170.
  • Perform multiple tests simultaneously.

Upon Request

New
Tramex EIFS inspection kit

Tramex EIFS inspection kit

EIK5.1

  • Clear, easy to read dial
  • Non-destructive, Deep Penetration Moisture Detection.
  • Backlit display for poor lighting conditions

Upon Request

New
TRAMEX BUILDING SURVEY INSPECTION KIT

TRAMEX BUILDING SURVEY INSPECTION KIT

BSIK5.1

ASTM F2170

  • Detects moisture through paint and most building materials.
  • Audio signal sounds when meter indicates high readings.
  • Large clear backlit digital display giving meaningful readings.

Upon Request

New
TRAMEX CONCRETE INSPECTION KIT

TRAMEX CONCRETE INSPECTION KIT

CIK5.1

ASTM F2659, ASTM F2170

  • Perform multiple tests simultaneously.
  • Backlit display for ease of reading in low-level lighting.
  • Instant, non-destructive concrete moisture content test 

Upon Request

MOISTURE ENCOUNTER

MOISTURE ENCOUNTER

FOR BUILDING MATERIALS

ME5

  • 5 Ranges of sensitivity: Wood & Timber / Shallow Depth / Drywall & Roofing / Plaster & Tile / Masonry
  • Dual-Depth penetration allows for comparative of surface and core moisture and elimination of substrate influence on the testing of coverings
  • Shallow Depth scale is designed to have a field penetration of up to 10mm (0.4 inches)

Upon Request

NON DESTRUCTIVE ROOF SCANNER

NON DESTRUCTIVE ROOF SCANNER

DSAL

  • Complies to ASTM D7954
  • Non-destructive impedance moisture meter
  • Three ranges of sensitivity enabling the inspection of a variety of roof membranes and insulation thicknesses

Upon Request

Tramex concrete encounter – non-destructive

Tramex concrete encounter – non-destructive

CME5

  • Non-destructive in operation with no need to probe, drill or mechanically damage the surface.
  • Clear easy-to-read analog dial.
  • Instant and precise readings to a depth of approximately  3⁄4" into the slab.

Upon Request

Hygrometer Probes
TRAHIPP1-0

Hygrometer Probes

Connects to CMEX2 & MRH3

Hygro-i2

ASTM F2170

Upon Request

Feedback data logger starter Kit

Feedback data logger starter Kit

DL-RHTX FBSK5.1

ASTM F2170

  • Bluetooth BLE enabled for use with mobile devices
  • Up to 100,000 data point entries possible
  • Instant set up and start modes. Used to perform ASTM F2170

Upon Request

Feedback data logger for temperature and relative humidity

Feedback data logger for temperature and relative humidity

DL-RHTA

  • Bluetooth BLE enabled for use with mobile devices.
  • Up to 100,000 data point entries. Instant set up and start modes.
  • Precise Ambient Relative Humidity and Temperature logging.

Upon Request

Professional Pin-Type Moisture Meter

Professional Pin-Type Moisture Meter

For Wood

PTM 2.0

  • Built-in calibration for 500+ wood species or standard calibration selection.
  • Wide moisture content range: 6 - 46% and digital readout to 0.1% accuracy
  • Adjustable temperature correction

Upon Request

Calibration Check Box
CALBOXWME-

Calibration Check Box

for WME Wood Moisture Encounter

CALBOXWME

Upon Request

Electronic Interface Cable
TRARHIE-00

Electronic Interface Cable

Connects Hygro-i Probe to CMEX2 & MRH3

Hygro-i RHIE

ASTM F2170 & BS 8201,8203, 5325

Upon Request

Calibration Salt Check Hygro-i Probes
TRASAL75-0

Calibration Salt Check Hygro-i Probes

TRASAL75-0

Upon Request

Calibration Check Plate
TRACALCRH-

Calibration Check Plate

for CME4 and CMEX2

TRACALCRH-

Upon Request

Roof And Wall Scanner
TRARWS-000

Roof And Wall Scanner

RWS

  • For non-destructive moisture evaluation of Roofs and EIFS Building Envelope
  • For tracing leaks into the waterproofing membrane back to the source
  • Fast and easy to operate

Upon Request

Moisture Detector
TRASKIPPER

Moisture Detector

For the Marine Industry

Skipper Plus

  • Three ranges for detecting moisture in GRP and hardwood for salt & freshwater.
  • Wide range of readings for wood, GRP and other materials
  • Identifies the presence of osmosis in GRP hulls.

Upon Request

Digital Moisture Meter

Digital Moisture Meter

For Concrete

CMEX II

ASTM F2170, ASTM F2420, BS 5325, BS 8203

  • Instant readings in non-destructive and wood probe modes
  • Measures up to 7% (6.99%) moisture content in concrete
  • Measures from 7% to 40% moisture content in wood with optional wood probes

Upon Request

Digital Moisture & Humidity Meter
TRMRH3KIT4

Digital Moisture & Humidity Meter

MRH III

  • Digital, non-destructive moisture meter.
  • Optional plug-in wood probe.

Upon Request

Building Inspection Moisture Meter

Building Inspection Moisture Meter

For Wood, Plaster, Drywall, Brick, Roofing

Moisture Encounter PLUS (MEP)

  • Non-destructive moisture measurement of wood
  • Deep signal penetration, up to 1.25°(30mm) in wood and drywall
  • Rubber electrode pads in direct contact with material being tested

Upon Request

Moisture Meter
TRACONCRET

Moisture Meter

For Concrete

CME4 Encounter

ASTM F2659

  • Designed, developed and calibrated specifically for concrete
  • Instant readings, measures up to 6% moisture content
  • Non-destructive operation per ASTM F2659 (No drilling)

Upon Request

Showing 1 to 22 of 22 (1 Pages)