Temperature / Humidity

• For applications like checking furnace efficiency, boiler tuning, and water heater checks.
  

3/4", 8'' Stem, 0 to 250°C x 2°C

• For use with wired or wireless LAN.
  

• To measure and record temperature using a thermocouple (Type K, J, T or S)
  

• It collects recorded data from data loggers (remote units) using short-range wireless communication.
  

• Rotating dual lasers help identify the measurement target.
• Optical resolution: 12:1.
  

• It Collects and stores humidity and temperature data measured

• It enables data collection and management using dedicated mobile device applications.
  

• DL-RHTX Data Logger 
• 5 x Hygro-i2 probes
• Wall mounting

• Non-destructive
• Gypsum reference reading range
• ASTM F2659

• Non-destructive
• ASTM F2659
• Comparative reading range

• Calibration Check Plate
• Infrared Thermometer
• Hole liners

• Non-destructive
• Gypsum reference reading range
• ASTM F2659

• Determine if moisture is coming from below or above the concrete slab surface
• Determine the type and extent of mitigation if needed
• Reusable, Extendable, and requires no plastic hole liners

• Infrared Thermometer 
  
• Free App available for Android and iOS (phone not included)
• Extension Handle

• Feedback Datalogger DL-RHTA
  
• Free App available for Android and iOS (phone not included)
• Contact Temperature Probe

• 7.8" (200mm) insulated pins for in-depth penetration
  
• 10" (260mm) Narrow Wand Relative Humidity Probe
• 1 x Hygro-i2 ® Relative Humidity probe

• Dual depth
• Non-invasive testing
• ASTM F2659

• Non-destructive
• Dual depth
• Extension handle

• Heavy-duty pin-type wood probe
• Infrared thermometer
• 7.8” insulated pins for in-depth penetration using pin probe

• 6 x Hole liners and caps
• Heavy-duty pin-type wood probe
• 7" (200mm) insulated pins for in-depth penetration using pin probe

• Hand held electrode with 7.8" (200mm) insulated pins
  
• 10" (260mm) narrow RH probe
• Hole punch
• Infrared Thermometer

• Hand held electrode with 7.8" (200mm) insulated pins
  
• 10" (260mm) narrow RH probe
• Hole punch
•  Infrared Thermometer

• Bluetooth BLE enabled for use with mobile devices
• Connectivity up to 50 meters (165ft) for highly accessible data downloads
  
• Up to 100,000 data point entries possible

• 0-6.9% concrete MC reading range
• 0-1 Gypsum reference reading range
• 0-4.3 CM equiv concrete reading range

• Non-destructive
• 0-6.9% concrete MC reading range
• Extension handle

• 0-6% concrete MC reading range
  
• 0-100 comparative reading range
• Extension handle

• Instant concrete moisture content test from 0 - 6.9% with CMEX II to ASTM F2659.
• Fastest, most reliable, Hygro-i2 ® Relative Humidity probe for testing to ASTM F2170.
• Perform multiple tests simultaneously.

• Perform multiple tests simultaneously.
• Backlit display for ease of reading in low-level lighting.
• Instant, non-destructive concrete moisture content test 
  

• High-accuracy J, K, T, E, R, S, B, N thermocouple readings
• Easy-to view LCD display
• Large memory capacity

• A handheld dewpoint meter with both manual and automatic data logging in one gauge
• Integrated magnets
• Stores 25,000 records in up to 999 batches

• Range : -200°C to 1370°C (-328 to 2498°F)
• Resolution : 0.1° and 1°
• Accuracy : ±1°C
• K type probe not included
  

• Used to collect data from 1 to 32 RTR data loggers without removing them from installed locations
  

• Capable of measuring temperature from -25 to 70°C and humidity from 0 to 99%RH with high accuracy

• It can be used in environments from -40°C to +80°C
  

• To measure and record temperature from 0 to 55°C and humidity from 10 to 95%RH.
  

• Ideal solution for a variety of applications for commercial contractors, facility managers, energy auditors and other requirements for thermal imaging inspection.
  

• Ideal for use in applications involving preventive maintenance